Best current price£14.70from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.70Visit shop B&Q - Helmi 10 Durable WoodTrim & Kitchen Cupboard Paint0.25L Claystone V486
Visit shop2 offers from £14.70 - £82.98
View price history by clicking the chart icon.
The Tikkurila Helmi 10 is a water-based paint designed for interior wood surfaces, trim, and furniture, offering a smooth, matte finish. It is ideal for high-traffic areas like kitchens and hallways due to its durability and washability. A key benefit is its ultra-smooth application and resistance to knocks. Note that this product is tinted to order and cannot be returned unless faulty. The paint provides a tough, washable surface resistant to daily wear and tear.
| Colour | Brown |
|---|---|
| Model Part Number | V486 |
| Brand | Tikkurila |
It is designed for interior wood surfaces, trim, and furniture. It is not suitable for floors or exterior applications.
The paint requires approximately 4 weeks to reach its full hardness and durability. Avoid heavy use or cleaning during this period.
No, this product is tinted to order and cannot be returned unless it arrives damaged or is faulty.
It can be applied by brush, roller, or sprayer. For best results and adhesion, use Tikkurila Helmi Primer first.
Clean with a damp cloth and mild detergent. Rinse with clean water. Avoid abrasive cleaners.
Yes, its durable and washable properties make it ideal for high-use areas like kitchen cabinets and trim.
It provides a refined, matte finish.
Ensure the paint is stirred thoroughly. Apply in thin, even coats, maintaining a wet edge. Use a high-quality brush or roller suitable for water-based paints.
Check that the surface was properly prepared and cleaned. Ensure the recommended Tikkurila Helmi Primer was used. Sand any glossy surfaces before priming.
Ensure adequate ventilation and maintain a consistent room temperature. High humidity or low temperatures can slow drying. Avoid applying too thickly.
Allow the full four-week curing period to elapse before testing durability. Avoid harsh cleaning or impact during this time.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and previous coatings. Lightly sand glossy surfaces to improve adhesion. For best results, apply one coat of Tikkurila Helmi Primer.
Application: Stir the paint thoroughly before use. Apply by brush, roller, or spray in thin, even coats. Avoid over-application. Recommended recoat time is typically 2-4 hours, depending on conditions. Allow at least 4 weeks for full curing before subjecting surfaces to heavy use or intensive cleaning.
Compatibility: Suitable for interior wood, trim, and furniture. Not recommended for floors or exterior use.
Care: Clean with a damp cloth and mild detergent. For tougher stains, use a slightly stronger detergent solution. Rinse with clean water and allow to dry. Avoid abrasive cleaners or tools that could damage the finish.
