Best current price£5.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.99Visit shop B&Q - 500G All Purpose Smooth Finish For ConcreteStoneWoodBrickPlaster Both Indoor & Outdoor (Smooth Finish Filler)
Visit shop1 offer from £5.99
View price history by clicking the chart icon.
This SuperGift.com All Purpose Smooth Finish Filler in Brown is designed for DIY enthusiasts and professionals needing a reliable filler for various surfaces like concrete, stone, wood, brick, and plaster. Its key benefit is providing a smooth, permanent, waterproof finish for both interior and exterior repairs. A potential consideration is its specific brown color, which may not suit all aesthetic needs.
| Colour | Brown |
|---|---|
| Brand | SuperGift.com |
This filler is suitable for a wide range of surfaces including concrete, stone, wood, brick, and plaster.
Yes, the filler provides a waterproof finish, making it suitable for interior and exterior use.
Yes, once the filler is fully dry and cured, it can be sanded smooth and is ready for painting.
Drying times can vary depending on the depth of the application and environmental conditions. Refer to the product packaging for specific drying time estimations.
This filler is designed for cosmetic repairs and filling voids. It is not intended for significant structural repairs.
This product is available in a convenient 500G size.
The brown color is a general shade. While it can be beneficial for certain repairs, it may require painting to match specific wood grains or brick colors precisely.
Ensure the product has not dried out in the container. If slightly stiff, you may be able to add a tiny amount of water (a few drops at a time) and mix thoroughly, but avoid making it too wet.
Apply filler in thin layers, allowing each layer to dry before applying the next. For deeper holes, slightly overfill the final layer to account for potential shrinkage.
Ensure the surface was properly prepared, clean, dry, and free from dust or contaminants. Lightly sanding glossy surfaces can improve adhesion.
Allow the filler to cure completely before sanding. Use fine-grit sandpaper and sand in a consistent motion. For a smoother finish, apply a second thin skim coat after the first has cured.
Preparation: Ensure the surfaces to be filled are clean, dry, and free from dust, grease, and loose material. For best adhesion, lightly abrade glossy surfaces.
Application: Apply the filler directly to the crack or hole using a suitable filling knife or trowel. Press firmly to ensure it fills the void completely. Smooth off the excess with the filling knife, slightly overfilling if necessary to allow for shrinkage. Allow to dry thoroughly as per manufacturer's instructions before sanding.
Compatibility: This filler is compatible with concrete, stone, wood, brick, and plaster. It is not recommended for use on flexible plastics or materials that experience significant movement.
Care: Store the filler in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container tightly sealed to maintain its consistency. Clean tools and spills immediately after use with water.
