Hunter Original Waterproof Printed Jacket - Multicolor - M

The jacket is made of 100% Polyester, featuring a full mesh body lining.

This jacket is designed for transitional seasons (spring and autumn) and protection against rain. It is not insulated and may not be warm enough for very cold winter conditions without additional layers.

The jacket runs true to size with a regular fit. For Size S, the centre back measurement is 75cm and the sleeve length from the shoulder point is 64cm. It's recommended to consult a size chart if available or consider your preferred fit for layering.

The jacket has a regular fit, which allows for some layering. While it can accommodate a lighter sweater, a very bulky one might feel restrictive.

The frequency depends on the amount of wear and exposure to harsh conditions. Typically, reapplying a waterproofing treatment once a year or when you notice a decrease in water repellency is recommended.

The provided product information does not specify if the jacket includes a hood. Please refer to the product's official listing or images for visual confirmation.

Welded seams mean that the seams are sealed with a special tape or adhesive, creating a completely waterproof barrier rather than just stitching, which can be a point of water entry.

Ensure the jacket is clean and free of dirt or residue. Reapply a suitable waterproofing treatment designed for polyester and waterproof coatings, following the treatment's instructions carefully.

Apply a small amount of graphite (from a pencil) or a silicone-based lubricant to the zipper teeth. Gently work the zipper up and down to loosen it.

Ensure you are wearing appropriate base layers. The mesh lining is designed for breathability and can feel slightly different against bare skin. Washing the jacket as per care instructions may also help soften the lining.

Check that the underarm eyelets are clear of obstruction. Ensure the jacket is not overly dirty, as this can impede breathability. Wash according to care instructions.