DeWalt Multi Material Drill Bit - 6mm x 123mm - DT6519-QZ

These drill bits are suitable for wood, plastics, mild steel, non-ferrous metals, and masonry.

Yes, these bits are designed for use with both rotary and percussion drills.

Select the drill bit size that matches the size of the screw or fastener you are using. Refer to the manufacturer's recommendations for pilot hole sizes.

Clean the bits after each use to remove debris. Store them in a dry place to prevent rust. Inspect the bits regularly for wear and tear.

The anti-slip shank with three milled clamping surfaces prevents rotation in the chuck, ensuring maximum retention and efficient power transfer.

Replace the drill bit when it becomes dull, or if the carbide head is damaged or worn.

The 120-degree tip grind provides optimal sharpness for efficient drilling and material removal.

CrNiMo steel provides optimal power transmission and breakage stability, even in the toughest applications.

Ensure the bit is fully inserted and the chuck is tightened securely. The anti-slip shank should prevent rotation, but check the chuck mechanism.

Check the drilling mode and speed. Increase speed if drilling through wood or plastic, and ensure you're using the percussion mode for masonry. Consider replacing the bit if it's dull.

Reduce the drilling speed and apply less pressure. Allow the bit to cool down periodically, especially when working with metal.