Bird Brand Premium Barn Paint - White - 5 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and professionals looking for a durable, decorative white paint for exterior surfaces like wood, metal, and plastic. Its key benefit is its resistance to rot, mould, and UV rays, ensuring a long-lasting finish. A caveat is its specific satin finish, which may not suit those preferring a high-gloss or matte appearance. This premium acrylic paint offers excellent coverage and can be applied over challenging surfaces such as tar and creosote, providing a protective and aesthetically pleasing solution.
All features
| Colour | White |
|---|---|
| Model Part Number | 0048 |
| Brand | Bird Brand |
Extended Product Information
FAQs
What surfaces can I use Bird Brand Premium Barn Paint on?
This paint is suitable for plastic, metal, and wood surfaces. It is also compatible with surfaces previously treated with tar and creosote.
How much area does one litre of this paint cover?
One litre of Bird Brand Premium Barn Paint covers approximately 10 to 13 square metres, depending on the surface porosity and application method.
What type of finish does this paint provide?
The paint provides a decorative satin finish, which is a smooth, low-sheen appearance.
Is this paint resistant to weather elements?
Yes, it is rot and mould resistant, and the satin finish is also UV resistant, offering good protection against weather.
Can I apply this paint directly over tar or creosote?
Yes, this paint is compatible with and can be applied directly over existing tar and creosote treatments.
How should I clean my brushes after painting?
Brushes and equipment should be cleaned with water immediately after use while the paint is still wet.
Do I need a primer before using this paint?
While the paint is designed for direct application and is compatible with tar/creosote, proper surface preparation is key. Light abrasion of glossy surfaces is recommended. For very dark or problematic surfaces, a suitable exterior primer might enhance adhesion and coverage, though it's not always strictly necessary if surfaces are clean and stable.
Troubleshooting
Paint is not adhering well to the surface.
Ensure the surface was properly cleaned and dry before application. For glossy surfaces, try lightly sanding them first to create a better key for the paint.
Uneven or streaky finish.
Ensure the paint is stirred thoroughly. Apply in thin, even coats, avoiding overworking the paint. Check that you are using the correct application tool (brush or roller) for the desired finish.
Paint is peeling after application.
This can occur if the surface was not adequately prepared or if moisture is trapped beneath the paint. Ensure the surface is free from contaminants and allow proper drying and curing time, especially in humid conditions.
White paint appears patchy or shows the underlying colour.
Apply an additional coat of paint. For significantly darker or contrasting base colours, a primer specifically designed for exterior use might be beneficial before applying the topcoat, even though this paint is designed for direct application.
Pros and Cons
Pros
- Excellent durability with rot, mould, and UV resistance.
- Versatile application on various materials including plastic, metal, and wood.
- Can be applied directly over tar and creosote.
- Provides a professional-looking satin finish.
- Good coverage rate for efficient project completion.
Cons
- Only available in a satin finish; other finishes are not offered.
- White colour might require multiple coats for optimal opacity on dark surfaces.
- Requires specific application conditions for best results (e.g., proper surface preparation).
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are clean, dry, and free from loose debris, grease, or flaking paint. For best adhesion, lightly abrade glossy surfaces. While compatible with tar and creosote, ensure these are stable and not excessively gummy.
Compatibility: This paint is suitable for application on plastic, metal, and wood. It is also compatible with surfaces previously treated with tar and creosote.
Application: Stir the paint thoroughly before use. Apply with a brush or roller. Two coats are recommended for best results, especially when covering dark or previously treated surfaces. Allow adequate drying time between coats as per manufacturer guidelines.
Care: Clean brushes and equipment with water immediately after use. For maintenance, the painted surface can be wiped clean with a damp cloth. Avoid harsh chemical cleaners, which may damage the finish.