Best current price£19.85from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.85Visit shop B&Q - 6.0 X 100 High Performance Powerfast Ii Wood Screws (Tubs)
Visit shop10 offers from £19.85 - £19.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professional builders seeking a reliable screw for wood constructions. The Fischer PowerFast FPF II CZF screw offers efficient installation and strong load-bearing capabilities, particularly in coated wood, hardwood, and softwood. A minor caveat is its specific PZ drive, requiring the correct bit.
| Colour | Blue |
|---|---|
| Model Part Number | 576969 |
| Brand | Fischer |
You will need a PZ (Pozidriv) drive bit. Using a Phillips (PH) bit may damage the screw head and lead to poor performance.
Yes, the blue passivated zinc plating offers weather resistance and corrosion protection, making them suitable for outdoor applications like carports and balconies. However, prolonged exposure to harsh conditions may eventually impact the finish.
Due to the screw's design with a special tip and thread, pre-drilling is generally not required for most wood types. However, for very hard woods or to ensure a perfect finish in delicate materials, a pilot hole can be beneficial.
It refers to the surface treatment of the screw. The blue passivation layer provides corrosion resistance and is chrome VI-free, making it an environmentally friendly option.
A full thread ensures that the entire length of the screw is engaged with the material, providing optimal force transfer and a stronger, more secure hold, especially in load-bearing applications.
The integrated wax coating significantly reduces the screw-in torque, allowing for smoother and faster installation with less effort and wear on your tools.
This particular model is 4.0mm in diameter and 30mm in length (4.0x30mm).
Ensure the screw is penetrating the wood and not just spinning in a pre-drilled hole that is too large. Check if the wood is too soft or damaged. For very hard materials, consider a pilot hole.
While designed to reduce splitting, extremely brittle wood or driving too close to the edge can still cause issues. Ensure screws are not over-tightened. Consider a slightly larger diameter screw or a pilot hole if splitting persists.
Verify you are using the correct PZ drive bit. Ensure your drill/driver is set to an appropriate speed and torque setting. The wax coating should facilitate smooth insertion; if resistance is high, check for obstructions or material density.
Ensure the countersunk head is entering a properly formed countersink in the material. If driving into a material that doesn't naturally countersink, a pre-drilled countersink may be necessary. Do not overtighten, as this can strip the wood around the head.
Setup: Ensure you are using the correct PZ (Pozidriv) drive bit for your screwdriver or drill. Select the appropriate screw length for the material thickness you are joining. For optimal performance, pre-drilling is generally not required due to the screw's design, but can be considered in very hard woods or for delicate finishes.
Compatibility: This screw is specifically designed for use in coated wood, hardwood, softwood, and timber connections. It is also suitable for fixing metal parts to wood, such as metal fittings, angles, and beam shoes. It is compatible with fischer plugs and recommended loads. The blue passivated zinc plating is chrome VI-free.
Care: Store screws in a dry environment to prevent corrosion. Clean any dust or debris from the screw head area after installation if a flush finish is critical. The weather-resistant coating offers good durability for exposed applications, but prolonged extreme exposure may eventually affect the finish.
