Cosatto Come and Go 2 i-Size 360 Car Seat - Hoglet

This i-Size car seat is rated for children up to 105cm in height, which typically corresponds to a maximum weight of around 18-19kg, but always refer to the height limit as the primary guide.

No, this specific i-Size model requires ISOFIX anchor points for a secure and compliant installation. It cannot be installed using only the vehicle's seatbelt.

The fabric covers are usually removable and machine washable. Please refer to the care label on the cover and consult the product manual for specific washing instructions, typically a cool or warm wash on a gentle cycle.

The seat is designed for Extended Rear Facing up to 105cm. Children can travel forward-facing only after they have reached the maximum height limit for rear-facing, as specified by i-Size regulations and the product manual.

Yes, the 360-degree rotation is a feature of the installed seat. It is designed to make it easier to get your child in and out of the seat, and to switch between rearward and forward-facing positions (when appropriate).

The harness and headrest typically adjust simultaneously via a mechanism at the top of the seat. Usually, you would press a release button or lever while moving the headrest up or down to the correct position for your child.

Ensure the ISOFIX points in your vehicle are clean and free of obstruction. Make sure the car seat's ISOFIX connectors are fully extended and firmly pushed into the vehicle anchors until they click. Check your vehicle manual for specific ISOFIX installation procedures.

Confirm that the top tether or support leg is correctly installed and engaged, as this often locks the rotation. Ensure no objects are obstructing the rotation base. Refer to the manual for specific instructions on engaging and disengaging the rotation lock.

Ensure the harness straps are pulled tightly and are at the correct height for your child (at or below shoulder level when rear-facing). Check that the chest clip is positioned correctly at armpit level and that the buckle is fully engaged.

Consult your vehicle's manual and the car seat's manual carefully. Ensure the support leg is firmly on the vehicle floor or the top tether is securely attached to the designated anchor point in your car. Improper installation can affect safety and rotation.