Riva Home Eclipse Blackout Eyelet Curtains - Purple

These curtains measure 66 inches (168 cm) in width and 54 inches (137 cm) in length per panel. Please measure your window opening to ensure these dimensions are suitable.

The curtains feature a specialized 3-pass blackout lining which is woven into the fabric. This dense layering effectively blocks out the majority of light from entering your room, creating a dark environment.

You will need a curtain rod with a diameter of less than 4cm (approximately 1.57 inches), as this is the internal diameter of the stainless steel eyelets for smooth operation.

Yes, these curtains are machine washable on a gentle, cold cycle. It is recommended to air dry or tumble dry on a very low setting, and avoid using bleach to protect the fabric and lining.

Yes, the dense 3-pass lining and polyester fabric provide insulating properties. They help block solar heat in summer to keep rooms cooler and retain warmth in winter, contributing to better temperature regulation.

Yes, you can iron these curtains on a low temperature setting. Always iron on the reverse side of the fabric to protect the blackout lining and the visible surface.

This specific product is for the Mauve colour at 66 x 54 inches. While Riva Home offers other variants, this guide is specific to the listed product. Please check the product range for other available options.

Ensure the curtain rod extends sufficiently beyond the window frame on both sides, and that the curtains are wider than the window, allowing for adequate gather to minimize light leakage around the edges. Adjust the curtain panels to sit as close to the wall as possible.

Allow the curtains to hang for a few days, as gravity often helps release minor creases. For more stubborn wrinkles, use a garment steamer on a low setting, or iron on the reverse side of the fabric with a low heat, avoiding direct contact with the blackout lining.

Check if the curtain rod is clean and free of debris. Ensure the rod is properly leveled and secured. If the issue persists, a silicone-based spray lubricant (ensure it's safe for metal and fabric) can be lightly applied to the rod where the eyelets pass, or clean the inside of the eyelets.

Verify that the curtains cover the entire window area completely, extending slightly beyond the frame to prevent drafts or heat transfer. Ensure there are no gaps where air can easily pass. For maximum thermal benefits, consider pairing with a draft excluder or sealing any window gaps.

This can happen if the fabric is not evenly gathered on the rod. Adjust the spacing of the eyelets and the folds of the fabric to distribute the weight and material evenly across the rod. Ensure the rod itself is level.