Milano Alpha Vertical Double Flat Panel Radiator - Anthracite - 1780Mm X 560Mm

Premium quality 1.5mm mild steel construction for strength and durability. Heat output of 5315 BTU...

Best current price£125.30from Best Heating

Colour

All Offers

4 offers from £125.30 - £297.50

View price history by clicking the chart icon.

Best HeatingMilano Anthracite Vertical Double Panel Designer Radiator 1600 X 280Mm
Free delivery in 1–3 days
£125.30
Visit shop

Product Information

Full details

This Milano Alpha Vertical Double Flat Panel Radiator in Anthracite is designed for homeowners seeking a stylish and efficient heating solution. Its premium mild steel construction and double flat panel design provide robust durability and a significant heat output, ideal for warming larger rooms. A key caveat is that radiator valves are sold separately and must be purchased in addition to the unit. This radiator offers a modern aesthetic with a hard-wearing anthracite powder-coated finish, blending seamlessly into contemporary interiors while delivering reliable performance.

All features

ColourGrey
BrandMilano

Extended Product Information

FAQs

Are radiator valves included with this product?

No, radiator valves are not included with the Milano Alpha Vertical Double Flat Panel Radiator and must be purchased separately.

What is the heat output of this radiator?

The radiator has a heat output of 5315 BTUs / 1558 Watts at T50 and 2716 BTUs / 796 Watts at T30.

What are the dimensions of the radiator?

The dimensions are 1780mm in height, 560mm in width, and 58mm in depth.

What material is the radiator made from?

The radiator is constructed from premium quality 1.5mm mild steel.

What is included with the radiator?

The radiator includes a blanking plug, a bleed plug, and wall fixings.

How should I clean the radiator?

Clean with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the anthracite powder-coated finish.

Is professional installation required?

Due to its size, weight, and plumbing requirements, professional installation by a qualified heating engineer is strongly recommended.

Troubleshooting

Radiator is not heating up

Check that the central heating system is operational. Ensure radiator valves are fully open. Bleed the radiator to release any trapped air. Verify that the thermostat is set correctly.

Radiator is only partially warm

This usually indicates trapped air. Bleed the radiator from the top valve until water begins to trickle out, then re-tighten the valve. If the issue persists, an imbalance in the system may require professional attention.

Leaking from valves or connections

Ensure all connections, including those for the valves and wall fixings, are securely tightened. If leaks persist, professional plumbing advice may be needed to inspect seals or replace faulty components.

Unusual noises (e.g., banging or gurgling)

Gurgling sounds typically indicate air in the system and can be resolved by bleeding the radiator. Banging noises might suggest issues with water flow or system pressure, which should be assessed by a heating engineer.

Pros and Cons

Pros

  • Modern and minimalist aesthetic complements contemporary decor.
  • Robust construction ensures long-term durability.
  • Significant heat output efficiently warms large rooms.
  • The anthracite finish is visually appealing and resistant to wear.
  • Includes necessary fixings for installation.

Cons

  • Radiator valves are not included and must be purchased separately.
  • The large size may not be suitable for very small spaces.
  • Professional installation is recommended due to its size and weight.
  • Higher BTU output might require system adjustments in some existing heating setups.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the radiator is installed by a qualified professional, especially considering its weight (104.87 lbs) and the need for plumbing connections.
  2. Confirm the wall structure can support the weight of the radiator and its water content.
  3. Install radiator valves (sold separately) onto the designated inlets.
  4. Use the included blanking and bleed plugs as per standard radiator installation procedures.
  5. Secure the radiator to the wall using the provided fixings.

Compatibility:

  • This radiator is compatible with standard central heating systems. Ensure your system is capable of supporting the required water volume and pressure.
  • Please note that radiator valves are *not included* and must be purchased separately. Choose valves compatible with your pipework and desired aesthetic.

Care:

  • To clean, use a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the powder-coated finish.
  • Periodically check for and release any trapped air using the bleed valve.
  • Ensure the radiator is powered off and cool before cleaning.

Price History

DatePrice
Visit shop