A single component joint filling system for the simple and rapid pointing of paved areas with join...A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. A unique blend of polymers and aggregates that bind together chemically. On exposure to the atmosphere Geo-Fix All Weather forms a stable, solid, mass that is unaffected by the weather once cured. For use in both dry and wet conditions. Remains permeable and allows rain water to pass into water course reducing puddling. Eliminates the need for sand/cement pointing!For pointing paving joints 5mm+. Suitable for domestic and commercial installations. Also compatible with most types of paving including natural stone, porcelain, terracotta, clay, concrete and cobble stones. It is cost-effective, eco-friendly and safe to use. Ideal for patios, pathways and any paved areas and is suitable for open porch ways / covered areas. Not suitable for “V" shaped joints. Simply brush the contents into the joints and leave to set. Normally cuires between 4 and 6 hours. Wet the paving surface. The paving must be kept wet during application but free from standing pools of water. Failure to wet the paving surface will result in temporary staining. Ensure that the areas where you are not working remain wet at all times. Carefully open the vacuum-packed bag and sprinkle GEO-FIX All Weather sufficient to cover an area of 2-3 m2 Using a soft brush, push the GEO-FIX All Weather into the joints ensuring that they are filled with the compound. The material MUST be compacted into the joints. Compact GEO-FIX All Weather into the joints with a pointing tool or by use of a vibrating plate. Top up and compact ensuring a fully compacted and topped up joint before carefully sweeping off any excess with a soft brush ensuring that the material is swept at a 45° angle to the joints. Finish the surface decoratively giving a smooth flat finish with a pointing tool before moving onto the next area to be jointed. Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush.
Bond-It Geo-Fix All Weather Ready Mixed Jointing Patio Paving Compound Grout 14KgFree delivery in 1–3 days£35.25Visit shop →
Geo-Fix All Weather Ready Mixed Jointing Patio Paving Compound Grout 14Kg 5061022230207Free delivery in 1–3 days£35.25Visit shop →
Product Information
Full details
A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. A unique blend of polymers and aggregates that bind together chemically. On exposure to the atmosphere Geo-Fix All Weather forms a stable, solid, mass that is unaffected by the weather once cured. For use in both dry and wet conditions. Remains permeable and allows rain water to pass into water course reducing puddling. Eliminates the need for sand/cement pointing!For pointing paving joints 5mm+. Suitable for domestic and commercial installations. Also compatible with most types of paving including natural stone, porcelain, terracotta, clay, concrete and cobble stones. It is cost-effective, eco-friendly and safe to use. Ideal for patios, pathways and any paved areas and is suitable for open porch ways / covered areas. Not suitable for “V" shaped joints. Simply brush the contents into the joints and leave to set. Normally cuires between 4 and 6 hours. Wet the paving surface. The paving must be kept wet during application but free from standing pools of water. Failure to wet the paving surface will result in temporary staining. Ensure that the areas where you are not working remain wet at all times. Carefully open the vacuum-packed bag and sprinkle GEO-FIX All Weather sufficient to cover an area of 2-3 m2 Using a soft brush, push the GEO-FIX All Weather into the joints ensuring that they are filled with the compound. The material MUST be compacted into the joints. Compact GEO-FIX All Weather into the joints with a pointing tool or by use of a vibrating plate. Top up and compact ensuring a fully compacted and topped up joint before carefully sweeping off any excess with a soft brush ensuring that the material is swept at a 45° angle to the joints. Finish the surface decoratively giving a smooth flat finish with a pointing tool before moving onto the next area to be jointed. Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush.