Heat Resistant Spray Paint - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and automotive professionals looking to protect and enhance surfaces exposed to high temperatures. The Simply SP-010 Black Heat Resistant Spray Paint offers exceptional adhesion and durability, resisting chemicals, weather, and extreme heat up to 600°C. A key caveat is that the red variant is only rated for up to 300°C.
All features
| Colour | Black |
|---|---|
| Model Part Number | SP-010 |
| Brand | Simply |
Extended Product Information
FAQs
What is the maximum temperature the black paint can withstand?
The black variant of the Simply SP-010 Heat Resistant Spray Paint can withstand temperatures of up to 600°C.
Is this paint suitable for plastic surfaces?
While it adheres to most surfaces, including some plastics, it is best suited for metal applications exposed to high heat. Always test on a small, inconspicuous area first.
How long does the paint need to cure?
Full curing usually requires exposure to heat. This can be achieved by running the associated engine or equipment, or by baking at a specific temperature, as per the product's detailed instructions.
Can I use this on interior items like radiators?
Yes, it is suitable for household uses, including radiators, fireplaces, and wood-burning stoves, where high temperatures are expected.
What is the difference between the black and red variants?
The primary difference is the temperature resistance. The black variant can withstand up to 600°C, while the red variant is rated for up to 300°C.
How do I achieve a scratch-free finish?
Ensure proper surface preparation and apply thin, even coats. Allow adequate drying and curing time. The paint's formula is designed to be scratch-resistant once fully cured.
Can this paint be applied over existing paint?
It is best applied to a bare, prepared surface. If applying over existing paint, ensure the old paint is sound, clean, and lightly abraded for adhesion. Remove any loose or flaking paint.
Troubleshooting
Uneven spray or spitting
Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, remove the nozzle and soak it in warm water, then dry thoroughly. Try on a test surface first.
Paint not adhering properly
Ensure the surface was thoroughly cleaned and degreased before application. Surface temperature during application should be within the recommended range (typically 10-30°C).
Runs or drips in the finish
Apply paint in thinner coats. Increase the distance between the can and the surface. Allow proper drying time between coats.
Paint bubbles or peels after application
The surface may not have been adequately prepared, or the item was not exposed to the necessary curing temperature after application. Ensure proper pre-treatment and follow curing recommendations.
Pros and Cons
Pros
- Excellent adhesion to various substrates.
- Resistant to a broad range of chemicals and environmental factors.
- High-temperature tolerance (up to 600°C for black variant) is suitable for demanding applications.
- Durable scratch-resistant surface.
- Suitable for both automotive and general household use.
- Available in a variety of colours for customisation.
Cons
- Red variant has a lower temperature resistance (300°C).
- Requires proper surface preparation for optimal results.
- Aerosol can application may require masking for precise areas.
- Long-term performance in extreme conditions may vary based on application.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from grease, oil, rust, and loose paint. For best results, lightly sand the surface and clean with a solvent degreaser.
- Mask off any adjacent areas you do not wish to paint.
- Shake the can vigorously for at least two minutes before use.
- Apply thin, even coats from a distance of 20-30 cm. Avoid applying too thickly.
- Allow adequate drying time between coats as per can instructions.
- For full curing, heat is often required. This can be achieved by running the engine (for automotive parts) or by exposing the painted item to its intended operating temperature.
Compatibility:
This spray paint adheres to most surfaces including metal, wood, and some plastics. It is specifically formulated for areas exposed to high temperatures. Always test on an inconspicuous area first if unsure about material compatibility.
Care:
Clean painted surfaces with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish. For maintenance, reapplication can be done following the same preparation and application steps.