RCODSSK Frosted Grey Window Film - 0.9x20 M

This product is designed primarily for privacy and light diffusion, not UV blocking. Specific UV protection capabilities are not stated in its specifications.

It is designed for interior application on smooth glass surfaces. Exterior application is not recommended as it may not withstand weather conditions and could be damaged.

The privacy effect is permanent as long as the film remains intact on the glass. Its durability is expected to provide long-lasting use.

The film provides a full privacy effect by creating an opaque frosted finish, meaning it blocks the view entirely.

While it adheres to glass, it is best suited for windows. Its performance on mirrors, especially regarding adhesion and potential long-term effects, has not been tested.

This film uses static cling (adhesive-free) technology, making it easier to apply, reposition, and remove without leaving residue. Adhesive films use a sticky backing that can be more permanent and harder to remove cleanly.

Yes, you can cut the film into various shapes using sharp scissors or a craft knife for decorative purposes, provided the application surface is suitable.

Ensure the glass surface is thoroughly cleaned and wet before application. Re-wet the glass and reapply the film, smoothing out all air and water. Check that the protective backing liner was completely removed.

Use a squeegee or credit card to firmly push out water and air bubbles towards the edges of the film. For stubborn bubbles, you may be able to gently lift a corner and reapply, or prick the bubble with a fine needle and smooth it down.

Use a sharp, new utility knife or craft blade and a metal ruler for a straight edge. Apply steady pressure for a clean cut.

Although designed for residue-free removal, minor residue can occur. Clean the glass with warm water and a mild soap solution, or use a glass cleaner. For tougher residue, a plastic scraper can be used carefully.