Best current price£14.70from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.70Visit shop B&Q - Helmi 10 Durable WoodTrim & Kitchen Cupboard Paint0.25L Claystone V486
Visit shop14 offers from £14.70 - £82.98
View price history by clicking the chart icon.
Tikkurila Helmi 10 is a water-based paint designed for hand-finished kitchens, interior woodwork, and furniture, offering an ultra-smooth application and durable finish. It is ideal for high-use areas like cupboards, doors, trim, and hallways, providing a refined matte look. A key caveat is that this product is tinted to order and therefore non-refundable unless damaged or faulty on arrival, and it requires a 4-week full curing period to avoid impacts and cleaning.
| Model Part Number | F497 |
|---|---|
| Brand | Tikkurila |
Tikkurila Helmi 10 is primarily designed for wood and composite surfaces like MDF. For metal, it is recommended to use a primer specifically designed for metal adhesion and corrosion protection before applying Helmi 10.
The paint is touch dry in about 1-2 hours and recoatable after 4-6 hours. However, it takes approximately 4 weeks for the paint to reach its full hardness and durability. Avoid impacts and rigorous cleaning during this curing period.
While Helmi 10 offers good durability, bathrooms can be high-moisture environments. Ensure excellent ventilation and consider using a more moisture-resistant coating if extreme humidity is a constant issue. Proper application and full curing are essential.
No, Tikkurila Helmi 10 is tinted to order. Therefore, it cannot be returned or refunded unless it is damaged or faulty upon arrival.
Once the paint has fully cured (after 4 weeks), you can clean surfaces with a damp cloth and a mild detergent. Avoid abrasive cleaners or harsh chemicals, especially during the initial curing phase.
While you can use other suitable primers, Tikkurila Helmi Primer is recommended to ensure exceptional adhesion, excellent flow, and a flawless professional finish. Using the recommended primer will yield the best results.
Yes, Tikkurila Helmi 10 can be applied by sprayer. Ensure you follow the manufacturer's guidelines for thinning (if necessary) and spray application techniques for water-based paints.
Ensure the surface was properly prepared (clean, dry, sanded if necessary) and that Tikkurila Helmi Primer was used. Check that application conditions (temperature, humidity) are within recommended ranges.
Apply paint in thin, even coats. Use a high-quality brush or roller suitable for water-based paints. Ensure adequate paint flow; avoid overworking the paint.
Stir paint thoroughly before and during application. Ensure consistent application technique across all surfaces. Check for any contamination in the paint.
Ensure paint is stirred well. If very cold, allow it to reach room temperature. Avoid adding water unless explicitly recommended for specific application methods (e.g., spraying) and only in small, controlled amounts.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and old flaking paint. Lightly sand glossy surfaces to improve adhesion.
Priming: For optimal results, use Tikkurila Helmi Primer. Apply one or two coats as needed, allowing adequate drying time between coats.
Application: Apply Tikkurila Helmi 10 with a brush, roller, or sprayer. Use thin, even coats. Stir the paint thoroughly before and during use.
Drying Time: Touch dry in approximately 1-2 hours. Recoatable after 4-6 hours. Note that the paint reaches its full hardness and durability after a 4-week curing period.
Cleaning: Clean tools and equipment immediately after use with water. Avoid strong detergents or abrasive cleaners on painted surfaces during the 4-week curing period. After full curing, clean with a damp cloth and mild detergent if necessary.
Compatibility: Suitable for interior woodwork, cupboards, doors, trim, and MDF. Not recommended for floors or exterior use.
