Connect Aluminium Roman Blind Kit With Metal Chain - Silver

No, the fabric for the Roman blind is not included. You will need to supply your own fabric.

Yes, the headrail, fibreglass rods, and bottom weight bar are designed to be cut down to your required width.

The maximum drop is 210cm. This cannot be shortened using the kit components, but the fabric length can be adjusted before assembly.

The kit includes a child safety cord cleat. This must be installed at a height where a child cannot reach the cord loop, preventing entanglement hazards.

You will likely need a tape measure, scissors or a craft knife for cutting fabric and tapes, a saw for cutting the aluminium components (if needed), a drill for wall mounting, and a screwdriver.

Yes, provided you select a blackout fabric. The kit itself does not provide blackout properties.

Wipe the aluminium headrail and plastic fittings with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.

Check that the cords are not tangled or twisted. Ensure the fibreglass rods and bottom bar are correctly seated within the fabric pockets and are not obstructing movement. Verify the cord lock mechanism is functioning correctly.

Ensure the cord is running freely through all guides and pulleys. Lubricate the cord lock mechanism sparingly with a silicone-based lubricant if necessary. Check for any fabric obstructions.

Ensure you have used the correct wall plugs for your wall type. Re-drill holes if necessary and ensure screws are fully tightened. If mounting on plasterboard, consider using heavier-duty fixings or mounting to wall studs.

Check that the pocket tape and loop tape are attached straight and evenly on the fabric. Ensure the fibreglass rods are straight and correctly inserted into the pockets. Adjust the spacing of the rods if necessary.