Enhance your shed's appearance with the Sadolin Shed and Fence Protection Woodstain. This wood sta...Enhance your shed's appearance with the Sadolin Shed and Fence Protection Woodstain. This wood stain features a rich colour that enhances the wood grains and textures, restoring your shed or fence's beauty. Its special water-based formula creates a long-lasting protective barrier on any rough-sawn exterior timber, offering up to five years of protection. With a non-drip finish, it makes your shed and fence showerproof in just 30 minutes. This durable protective barrier guards against all weather conditions, including damaging UV rays and frost. Rainproof in 30 minutes ensures that even when there is a slight threat of rain you can protect rough sawn timber for up to 5 years. The formulation is easy to apply with a non-drip consistency to reduce mess. Suitable for all exterior rough sawn timber including sheds and fences. Offers 5 years protection, is showerproof in 30 minutes, provides an all-weather barrier, has wax-enriched water repellency and a non-drip application. Apply by brush, with 2 coats recommended. Touch dry in 4-6 hours, re-coat in 4-6 hours.
This guide is designed for homeowners looking to protect and enhance their exterior wooden structures like sheds and fences. The Sadolin Shed and Fence Protection Woodstain offers up to five years of weather protection, enhancing wood grain while providing a durable barrier. Note that it's designed specifically for rough-sawn timber and requires two coats for optimal performance.
All features
Colour
Grey
Brand
Sadolin
Extended Product Information
FAQs
How long does the protection last?
The Sadolin Shed and Fence Protection Woodstain provides up to 5 years of protection.
Can I use this on smooth wood?
No, it is designed specifically for rough-sawn timber.
How many coats are required?
Two coats are recommended for optimal protection.
How long does it take to dry?
It takes 4-6 hours to touch dry, and 4-6 hours between coats. It is showerproof in 30 minutes.
How do I apply the wood stain?
Apply using a brush, following the grain of the wood.
Can I use it on decking?
No, this product is designed for sheds and fences, not decking.
What should I do if it rains shortly after application?
The wood stain is showerproof in 30 minutes, so it will resist light rain after this time.
Troubleshooting
Wood stain appears patchy after application.
Ensure even application, and apply a second coat if necessary.
The wood stain is taking longer than expected to dry.
Ensure proper ventilation and check the weather conditions. Avoid applying in very humid or cold conditions.
Pros and Cons
Pros
Provides up to 5 years of protection.
Quickly becomes showerproof.
Enhances the look of wood with rich color.
Easy to apply with a non-drip formula.
Protects against UV rays and frost.
Cons
Requires two coats for optimal protection.
Specifically designed for rough-sawn timber.
Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from any previous coatings or loose materials. Lightly sand the wood if needed.
Application: Stir the wood stain thoroughly before use. Apply using a brush, following the grain of the wood. Two coats are recommended for optimal protection.
Drying Time: Allow 4-6 hours for touch-drying, and 4-6 hours between coats. The wood stain becomes showerproof in approximately 30 minutes.
Compatibility: This product is specifically designed for use on rough-sawn exterior timber, including sheds and fences.
Care: Clean brushes immediately after use with water. Store the product in a cool, dry place and ensure the container is tightly sealed when not in use.