CFOFT French Cleat Picture Hanger - 18 Inch - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The CFOFT 18-inch French Cleat Picture Hanger is designed for homeowners and decorators who need a secure, professional-grade solution for mounting mirrors, artwork, shelving, and heavy wall frames. Its interlocking aluminum Z-bar design provides exceptional stability for items weighing up to 90 lbs, offering a clean, flush-mount appearance that is difficult to achieve with traditional wire or hook systems. While it provides a highly secure hold, the primary caveat is that it requires precise measuring and level installation to ensure the brackets interlock perfectly for a straight display.
All features
| Colour | White |
|---|---|
| Brand | CFOFT |
Extended Product Information
FAQs
Can this be used on masonry or brick walls?
The kit is optimized for wood and drywall. For masonry, you would need to source specific wall anchors suitable for that material.
Does the 18-inch length need to be mounted to a stud?
While mounting to a stud provides the best support, the included expansion plugs allow for a secure hold in standard drywall for moderate weights.
How do I remove the item once mounted?
Simply lift the object vertically to disengage the interlocking brackets from the wall mount.
Are the brackets visible after installation?
No, the Z-bar design is hidden behind the frame or mirror, resulting in a clean, flush appearance.
What is the maximum weight capacity?
The kit is rated to support up to 90 lbs when installed correctly.
Troubleshooting
The frame is not sitting flush against the wall.
Check that the brackets are fully interlocked and that no debris is stuck between the Z-bar channels.
The item is tilted even after using the level.
Verify that your pilot holes were drilled accurately. You may need to slightly enlarge the screw holes on the bracket to allow for minor leveling adjustments.
Pros and Cons
Pros
- Supports heavy items up to 90 lbs
- Creates a professional, flush-wall finish
- Includes all necessary installation hardware and a level
- Reusable for flexible decor arrangement
Cons
- Requires precise measurement for perfect alignment
- Not ideal for very small or lightweight photo frames
- Cannot be adjusted once the brackets are screwed into the wall and object
Setup, Compatibility & Care
To install, first attach one side of the Z-bar to the back of your frame using the provided self-tapping screws, ensuring it is centered. Second, determine the mounting position on the wall using the included spirit level. Use the expansion plugs and self-drilling screws if mounting directly into drywall. Once both pieces are secured, simply slide the frame-mounted bracket into the wall-mounted bracket until they lock. The included clear bumpers should be placed on the bottom corners of your decor to keep the frame parallel to the wall and prevent scratching. The aluminum bars require no special maintenance; if they accumulate dust, simply wipe with a dry cloth.