Best current price£13.36from The Range
Shopping.co.uk recommended and popular offers
The Range£13.36Visit shop Jcp Fixings Ankerbolts Hexagon Flange Head Bzp 5/6 X 50Mm - Fjjab05/06050 - Box Of 100 - Grey
Visit shop26 offers from £13.36 - £37.83
View price history by clicking the chart icon.
The JCP Fixings Ankerbolts Hexagon Flange Head is designed for professional contractors and DIY enthusiasts who require reliable, heavy-duty fastening solutions in masonry and concrete. These bolts provide exceptional holding strength and an enhanced grip through their integrated flange head, though users should ensure they have the correct drill bit size for their specific diameter to avoid installation issues.
| Colour | Silver |
|---|---|
| Model Part Number | 1267942 |
| Brand | JCP Fixings |
These bolts feature a bright zinc plating which provides some corrosion resistance, but they are primarily designed for internal or sheltered environments.
You will need a masonry drill bit, a hammer drill, and a standard socket or spanner set appropriate for the hexagon head size.
No, these are expansion-style anchors and are typically intended for permanent, single-use applications.
Yes, they are compatible with most masonry types, but the performance depends heavily on the density and quality of the substrate.
No, the integrated hexagon flange head is designed to act as a washer, providing a wide bearing surface.
The hole is likely too large or the masonry is too soft; ensure the correct drill bit size is used or move to a more solid section of the wall.
Ensure the hole is clear of masonry dust and that the hole depth matches the required length of the bolt.
To install, drill a hole into the masonry that matches the diameter of the ankerbolt. Clear all dust and debris from the hole using a brush or blower for maximum adhesion. Insert the bolt through the fixture and into the hole, tightening it until the flange head sits flush against the surface. Do not over-torque, as this may damage the substrate. Store these bolts in a dry place to maintain the integrity of the zinc plating and avoid pre-installation rust.
