Sirui ET-1004 Tripod with E-10 Ball Head - Aluminium
Best current price£159.00from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£159.00Visit shop Sirui ET-1004 Tripod - Aluminium - 8kg - Black
Visit shopWex Photo Video£159.00Visit shop All Offers
2 offers from £159.00 - £199.00
View price history by clicking the chart icon.
Wex Photo VideoSirui ET-1004 Tripod - Aluminium - 8kg - Black
Free delivery in 1–3 days
£159.00
Visit shop
Sirui ET-2004 Aluminium Tripod - 144cm Height - 12kg Capacity - BlackFree delivery in 1–3 days£199.00Visit shop →
Product Information
Full details
The Sirui ET-1004 Easy Traveler Aluminium Tripod is designed for photographers seeking a lightweight yet sturdy support for digital and film cameras. Its primary benefit is portability without compromising stability, supporting up to 8kg. A potential consideration is its maximum height, which may be limiting for some users. Key features include a lightweight aluminium construction, a 180° leg folding mechanism for compact storage, multiple leg angles, and the included E-10 Ball Head with a quick-release plate.
All features
| Brand | Sirui |
|---|
Extended Product Information
FAQs
What is the maximum weight capacity of the Sirui ET-1004?
The maximum weight capacity is 8 kg.
What type of cameras is this tripod suitable for?
It is suitable for digital and film cameras.
How compact is the tripod for travel?
The legs can be folded upwards by 180°, and it weighs only 1.3 kg, making it very compact and portable.
Does it come with a carrying case?
Yes, it includes a transport bag with a strap.
What are the dimensions of the included ball head plate?
The included ball head uses the SIRUI TY-50E removable plate, which has a 1/4" mounting screw.
Can I use this tripod for macro photography?
Yes, the reversible center column and multiple leg angles allow for very low shooting positions, which is beneficial for macro photography.
What is the difference between this model and the ET-2004?
The ET-2004 is a larger tripod with an E-20 ball head, offering a higher load capacity and potentially greater height, while the ET-1004 is more focused on ultra-portability.
Troubleshooting
Leg clamps are stiff or difficult to operate.
Ensure there is no debris in the clamp mechanism. Apply a small amount of dry lubricant to the clamp parts. Check for any visible damage.
Ball head is not holding the camera securely.
Tighten the main ball head locking knob firmly. Ensure the quick-release plate is properly seated and locked in the head's clamp. Check the condition of the plate's rubber grip.
Tripod feels unstable at maximum height.
Avoid extending legs and center column to their absolute maximum. Ensure all leg sections and clamps are fully secured. Use a wider leg stance for added stability.
Quick-release plate is difficult to attach/detach.
Ensure the plate is aligned correctly with the head's clamp. Loosen the clamp screw sufficiently. Clean any debris from the plate and the clamp.
Pros and Cons
Pros
- Extremely portable and lightweight for travel.
- Robust 8 kg load capacity for its size.
- Quick setup and pack-down with clamp locks and reversible center column.
- Includes a capable ball head with a quick-release plate.
- Durable aluminium construction.
Cons
- Maximum height of 139 cm might be insufficient for some photographers.
- Clamp leg locks can be less intuitive than twist locks for beginners.
- The short center column (included) adds versatility but also a point of potential instability if overextended.
Setup, Compatibility & Care
Setup:
- Extend the legs to the desired height and lock each section using the clamp levers.
- Adjust the leg angles by pulling out the leg and selecting a notch.
- If needed, install the short center column for low-angle shots.
- Mount the camera by attaching it to the TY-50E quick-release plate and then sliding the plate into the E-10 ball head's clamp until secure.
- Use the center column adjustment knob to fine-tune height and the ball head knobs for panoramic and tilt adjustments.
Compatibility:
- Camera Mount: The tripod head features a 1/4" screw suitable for most digital and film cameras. The included plate (TY-50E) is 1/4".
- Tripod Mount: The tripod base has a 3/8" receiver, common for most heads. The included E-10 ball head has a 3/8" screw.
Care:
- Cleaning: Wipe the aluminium legs and ball head with a soft, damp cloth. Avoid abrasive cleaners.
- Lubrication: Periodically, a small amount of dry lubricant can be applied to the leg clamps to ensure smooth operation.
- Storage: Store in the provided carrying case to protect it from dust and damage. Ensure legs are dry before storing for extended periods.