Shopping.co.uk

Connect Yellow / Green Earth Heat Shrink - 13.0mm - Roll 3m

Connect Yellow / Green Earth Heat Shrink - 13.0mm - Roll 3m

General description Ideal for the insulation of electronics, terminal lugs, small electrical parts...

Best current price£12.06from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

5 offers from £12.06 - £37.55

View price history by clicking the chart icon.

eBayConnect Yellow / Green Earth 13.0mm Heat Shrink - Roll 3m - 37294
Free delivery in 1–3 days
£12.06
Visit shop

Product Information

Full details

This Connect Yellow/Green Earth Heat Shrink tubing is ideal for insulating electronics, terminal lugs, and small electrical parts in household and hobbyist applications. Its key benefit is providing a secure, insulated connection for earth wiring. A caveat is that it requires a heat source, like a hot air blower, for proper application. This product offers a 2:1 shrink ratio and operates within a wide temperature range, ensuring durability and compliance with RoHS standards.

All features

Model Part Number37294
BrandConnect

Extended Product Information

FAQs

What is the primary use for this yellow/green heat shrink?

This tubing is specifically designed for insulating and protecting earth (ground) wire connections in electrical systems, ensuring clear identification and safety.

What temperature range does this heat shrink operate in?

It operates effectively within a wide temperature range of -55°C to +125°C.

What is the shrink ratio?

The shrink ratio is 2:1, meaning the tubing will shrink to half its original diameter when heated.

What is needed to apply this heat shrink?

You will need a heat source, such as a hot air blower or a heat gun. The Connect Laser Flameless Hot Air Blower (Part No 6848) is recommended for optimal results.

Is this product environmentally compliant?

Yes, it is RoHS compliant, meaning it adheres to regulations regarding hazardous substances.

What are the dimensions of this product?

This specific product is 13.0mm in diameter and comes on a 3-meter roll.

Can I use this for general wire insulation, not just earth wires?

While it is specifically colored for earth wires for safety identification, it can technically be used for insulating other wire connections as long as the temperature and shrink ratio are suitable for the application.

Troubleshooting

Heat shrink not shrinking evenly

Ensure heat is applied evenly and consistently across the entire length of the tubing. Move the heat source continuously.

Tubing shrinking too slowly

Increase the heat setting slightly or move the heat source closer, but be cautious not to overheat or scorch the tubing.

Scorching or melting of the tubing

Reduce the heat temperature or increase the distance of the heat source. Ensure continuous movement of the heat source.

Poor seal at the ends

Ensure the tubing extends sufficiently beyond the connection point and apply heat to the ends first to create a seal.

Pros and Cons

Pros

  • Clearly identifies earth connections with its distinct yellow/green color.
  • Offers reliable insulation across a broad temperature spectrum.
  • RoHS compliant, meeting important environmental and safety regulations.
  • Economical sizing is suitable for hobbyists and small repair jobs.
  • Provides robust protection for electrical connections.

Cons

  • Requires a separate heat source for application, adding to equipment needs.
  • Not suitable for very high-temperature industrial applications.
  • Smaller reels may require multiple pieces for larger projects.
  • Shrink ratio of 2:1 might not be sufficient for significantly irregular shapes.

Setup, Compatibility & Care

Setup:

  1. Cut the heat shrink tubing to the desired length, ensuring it is long enough to overlap the connection by at least 1cm on each side.
  2. Slide the tubing over the wire or connection *before* making the electrical join (e.g., before soldering or crimping).
  3. Once the connection is made and secure, position the heat shrink tubing to cover the joint completely.
  4. Apply heat evenly using a hot air blower (Part No 6848 recommended) or a heat gun on a low setting. Move the heat source continuously to avoid scorching.
  5. Continue applying heat until the tubing has shrunk tightly around the connection and the ends are sealed.

Compatibility:

  • Compatible with most types of electrical wires and terminal lugs used for earthing.
  • Suitable for use with the Connect Laser Flameless Hot Air Blower (Part No 6848).
  • Works within a temperature range of -55°C to +125°C.

Care:

  • Store in a dry place away from direct sunlight and extreme temperatures.
  • Keep the tubing clean and free from dust or debris before application.
  • Avoid exposing the applied tubing to harsh chemicals or solvents.

Price History

DatePrice
Visit shop