Solyx Vintage Gold On Silver Mirror Window Film - Gold - SX-7002
Best current price£44.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£44.99Visit shop - Solyx Vintage Gold On Silver Window Film (L) 1M (W) 670mm
Visit shopB&Q£44.99Visit shop One Offer
1 offer from £44.99
View price history by clicking the chart icon.
B&Q - Solyx Vintage Gold On Silver Window Film (L) 1M (W) 670mm
Free delivery in 1–3 days
£44.99
Visit shop
Product Information
Full details
The Solyx Vintage Gold On Silver Mirror Window Film (SX-7002) is an ideal choice for interior designers, homeowners, and renters looking to transform standard glass surfaces into antique-style decorative mirrors. By providing an elegant gold-on-silver aesthetic, it serves both as a daytime privacy screen and a stylish architectural accent; however, potential users should note that as a reflective film, it requires a clean, flat surface to prevent bubbling or uneven finishes during the application process.
All features
| Colour | Gold |
|---|---|
| Model Part Number | SX-7002 |
| Brand | Solyx |
Extended Product Information
FAQs
Can this film be used on double-glazed windows?
Yes, but ensure it is installed on the internal surface of the glass to avoid excessive heat buildup.
Is it safe to use in the bathroom?
Yes, the acrylic adhesive is moisture-resistant, though it should not be placed in areas of direct, constant water spray.
Does this film block UV rays?
While primarily decorative, most Solyx reflective films provide a significant reduction in UV transmission, though it is not marketed as a dedicated UV-protective film.
How do I remove the film later?
Slowly peel back from a corner; using a heat gun or hair dryer on a low setting can help soften the adhesive for easier removal.
Can I install this on a curved surface?
This film is designed for flat surfaces; applying it to compound curves may result in wrinkling.
Troubleshooting
Bubbles or wrinkles appearing under the film
Use a pin to prick small holes in the center of the bubble and squeegee the air out, or re-lift the edge if the adhesive is still tacky.
Film edges peeling after a few days
Ensure the glass surface was properly degreased with isopropyl alcohol before application and use a heat gun on low settings to help soften and reset the adhesive.
Pros and Cons
Pros
- Sophisticated vintage aesthetic
- Easy to remove for temporary installations
- Enhanced daytime privacy
- Meets rigorous fire safety standards
Cons
- Requires professional-level surface preparation
- Not suitable for all non-glass surfaces
- Reflective finish can highlight surface imperfections
Setup, Compatibility & Care
Before installation, thoroughly clean the glass using a non-ammonia based cleaner to remove all grease and debris. Measure your glass surface and cut the film with a sharp hobby knife, leaving a slight overlap for trimming. Use a plastic squeegee to push out air bubbles starting from the center and moving toward the edges. Once installed, avoid using abrasive cleaning pads, as these can scratch the metallic finish. Clean the film with a soft microfiber cloth and a mild soap-and-water solution to maintain its clarity and sheen over time.