Setup, Compatibility & Care
To install the PSW113M, ensure you have a 35mm deep pattress box installed in the wall, as the depth of the screened housing exceeds that of standard unshielded modules.
- Strip the outer insulation of your coaxial cable (PF100, H109F, or QF100) to expose the 1mm center conductor.
- Apply an F-connector to the prepared cable end.
- Secure the F-connector onto the rear thread of the module.
- Snap the module into your mounting frame or faceplate.
Keep the module clean and dry. Avoid over-tightening the F-connector with pliers, as finger-tightening is sufficient to maintain a strong electrical connection.