Wire Rope Grips - 16mm - Silver
Best current price£11.50from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£11.50Visit shop B&Q - 16mm Wire Rope Grips X10Din741 Galvanised Commercial Bulldog Clamp
Visit shopB&Q£11.50Visit shop All Offers
3 offers from £11.50
View price history by clicking the chart icon.
B&QB&Q - 16mm Wire Rope Grips X10Din741 Galvanised Commercial Bulldog Clamp
Free delivery in 1–3 days
£11.50
Visit shop
eBayWire Rope Grip Clamps 16MM X10 (Galvanised Cable Steel Metal Wire U Bolts)
Free delivery in 1–3 days
£11.50
Visit shop
OnBuy.comWire Rope Grips 16Mm X10 - Bulldog Clamp Cable Galvanised Commercial 600988491274
Free delivery in 1–3 days
£11.50
Visit shop
Product Information
Full details
This guide is for individuals needing to create secure loops or temporary joins in wire rope assemblies, particularly for marine rigging or land-based applications. The SecureFix Direct 16mm Galvanised Commercial Wire Rope Grips offer reliable strength and corrosion resistance, ensuring a dependable connection. A key consideration is the correct installation procedure to maintain the integrity of the wire rope and the grip itself.
All features
| Colour | Silver |
|---|---|
| Model Part Number | SFCOMG16 |
| Brand | SecureFix Direct |
Extended Product Information
FAQs
What is the primary use of these wire rope grips?
These grips are primarily used to create secure loops at the ends of wire ropes or to make temporary joins in a wire rope assembly.
Are these grips suitable for marine environments?
Yes, they are manufactured from galvanised mild steel, which provides excellent corrosion resistance, making them suitable for use on board boats and in other exposed marine applications.
How many grips should I use for a single loop?
Typically, at least two grips are recommended to form a secure loop, with appropriate spacing between them as per the installation guidelines.
What is the recommended spacing between grips?
The spacing between grips should be at least 6 times the diameter of the wire rope.
Do I need to re-tighten the grips after initial use?
Yes, it is crucial to re-check and re-tighten the torque settings after the first application of load and again after 24 hours. Periodic checks during service are also recommended.
What is the material and finish of these grips?
They are made from mild steel with a galvanised coating for enhanced corrosion resistance.
Can these grips be used on ropes other than 16mm?
No, these specific grips are designed exclusively for 16mm diameter wire rope. Using them on different sizes can lead to insecure connections.
Troubleshooting
Grip appears to be slipping under load.
Immediately reduce the load. Check that the rope diameter matches the grip size (16mm). Ensure the nuts are tightened to the correct torque specification and that the 'U' bolt is on the unloaded end. Re-tighten and re-test with a reduced load.
Difficulty tightening nuts.
Ensure the threads are clean and adequately greased. If threads are damaged, the grip may need to be replaced. Use appropriate tools to apply even pressure.
Visible signs of corrosion on the grip.
Minor surface rust can often be cleaned and a protective coating applied. However, significant pitting or deep corrosion may compromise the grip's strength and necessitate replacement.
Pros and Cons
Pros
- Durable and corrosion-resistant due to galvanised finish.
- Designed to industry standards (DIN 741) for reliable performance.
- Suitable for demanding environments such as marine rigging.
- Enables secure creation of wire rope loops and temporary joins.
- Comes in a pack of 10 for multiple applications.
Cons
- Requires careful adherence to installation instructions for optimal safety and performance.
- Torque settings need regular checks, especially after initial load application and during service.
- Not suitable for permanent, high-stress structural applications without professional assessment.
- Only compatible with 16mm wire rope.
Setup, Compatibility & Care
Setup:
- Grease Threads: Before assembly, thoroughly grease the threads on the nuts and bolts to ensure smooth tightening and prevent seizing.
- Orientation: Ensure the 'U' bolt section is always placed on the *unloaded* or dead end of the wire rope, with the saddle on the live or loaded end.
- Spacing: Apply grips with a minimum spacing of 6 times the diameter of the wire rope between each grip.
- Tightening: Tighten each nut evenly and alternately to achieve the recommended torque settings. Consult manufacturer guidelines for specific torque values for 16mm wire rope.
- Initial Load & Checks: After the initial application of load, and again after 24 hours, re-check and re-tighten the torque settings as necessary. Periodically check torque settings during service.
Compatibility:
- These grips are specifically designed for 16mm diameter wire rope.
- Suitable for use with galvanised or stainless steel wire ropes.
Care:
- Inspect grips regularly for signs of wear, corrosion, or damage.
- Ensure all fasteners remain tight, especially after periods of use or exposure to environmental changes.
- Clean off any dirt or debris that could interfere with the grip's function.