Fujifilm Instax Mini Film - 20 Shots

This pack of Fujifilm Instax Mini Film contains 20 sheets of instant photo paper, typically split into two cartridges of 10 sheets each.

This film is designed for use with all Fujifilm Instax Mini instant cameras, including models like the Instax Mini 11, Mini 90, Mini Evo, and others in the Instax Mini series.

Unused film should be stored in a cool, dry place, away from direct sunlight, high humidity, and extreme temperatures. Room temperature (5-40°C or 41-104°F) is generally ideal. Always check the expiration date.

Photos typically begin to appear within 90 seconds of ejection. Full development, where the image reaches its final clarity and color, usually takes about 5-10 minutes, depending on the ambient temperature.

No, it is not recommended to shake the photo. Shaking does not speed up the development process and can potentially interfere with the chemical distribution, leading to uneven or damaged images. Let the photo develop naturally.

The dark slide is a black protective sheet that automatically ejects from your camera when you load a new film pack and take the first 'shot'. It protects the film from light. You should discard the dark slide once it has ejected.

Lighting conditions are crucial. Ensure you have adequate light when taking photos. If your camera has exposure settings (like 'Hi-Key' or 'Low-Key'), adjust them according to the scene. Avoid strong direct light on the print during its initial development. Using the camera's flash indoors or in low light is often necessary.

Ensure the dark slide (black protective sheet) ejected successfully after loading new film. If the camera was opened with film inside, the film may be light-exposed. Ensure adequate lighting when shooting; use the flash in low-light conditions. Check camera battery levels, as low power can affect flash performance.

Protect the developing print from bright light (especially direct sunlight) immediately after ejection for the first 1-2 minutes. Ensure film is not expired and has been stored in a cool, dry place. Extreme temperatures during development can affect results; avoid shooting or developing in very hot or very cold conditions. If your camera has exposure settings, ensure they are appropriate for the scene.

Check if the camera batteries are charged and correctly inserted. If the film cartridge was just loaded, ensure it is fully seated and aligned properly inside the camera. Do not force the film door open if there's film inside, as this will ruin the remaining shots. If the issue persists, consult your camera's manual for specific troubleshooting.

This can sometimes be caused by dust or debris on the film rollers inside the camera. Refer to your camera's manual for instructions on how to gently clean the rollers with a soft, lint-free cloth. Avoid bending or pressing on the film as it's developing, as this can also create marks.