Best current price£84.22from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£84.22Visit shop U-Pol 7.5L 2K Lacquer Kit 2080 + 2031 Fast Hardener Clear Coat Activator Upol 3513249121872
Visit shop1 offer from £84.22
View price history by clicking the chart icon.
The U-POL Clear Coat Lacquer Kit is a professional-grade 2K HS acrylic clearcoat system designed for automotive refinishers and body shop technicians who demand high-gloss results and rapid curing times. It delivers a durable, UV-resistant, and chemically resilient finish that enhances the longevity of vehicle paint jobs; however, due to the fast-acting nature of the included S2031 hardener, users must be prepared for a shorter pot life during application.
| Model Part Number | S2080 + S2031 |
|---|---|
| Brand | U-POL |
While other U-POL hardeners exist, this kit is specifically balanced with the S2031 for extra-fast curing. Mixing other grades may alter the drying time or durability.
Once the S2080 and S2031 are mixed, the pot life is limited due to the extra-fast hardener. You should plan to spray the mixture within the time specified on the technical documentation provided with your batch.
The S2080/S2031 system is a high-solid formulation. Check the technical data sheet for your specific region, as some climate-dependent thinning may be permitted but is often not required.
This is a professional 2K product containing isocyanates. It should only be used in a professional spray booth with adequate ventilation and proper respiratory protection.
Due to the fast-acting nature of the S2031, the clearcoat cures rapidly, but wait at least 24 hours to ensure full cross-linking before performing any aggressive buffing or polishing.
Verify the spray gun pressure settings and ensure the overlap during application is correct; adjust thinning if the technical data sheet guidelines allow.
You are exceeding the pot life. Mix smaller batches or ensure your workspace temperature is controlled and cooler during application.
Ensure the basecoat was properly degreased and that you have respected the recommended flash-off times between coats.
To ensure a successful finish, always mix the S2080 and S2031 components in a clean, dry container using a mixing stick to ensure complete integration of the hardener. Because this is a 2K (two-component) system, the chemical reaction begins immediately upon mixing. Always wear appropriate personal protective equipment, including a respirator with organic vapor cartridges, nitrile gloves, and eye protection. After application, clean your spray equipment immediately using a suitable lacquer thinner, as the fast-acting nature of this product can cause it to harden inside the gun nozzle and air cap if left sitting.
