Bristan Cobalt Shower Pack 2 - COBALT-SHWR-PK2

The shower valve is designed to fit into a minimum wall cavity depth of 35mm.

Yes, this shower pack is compatible with combi boilers, provided they can supply adequate water pressure and flow.

Use a soft cloth dampened with water and a mild soap. For limescale, soak the affected parts in a solution of white vinegar for a few hours, then rinse and wipe clean.

Use the integrated diverter control on the shower valve. Simply turn the appropriate knob or lever to select your desired outlet.

No, this model features a single-function handset.

The shower valve uses standard 15mm inlet connections.

Yes, rear access is required to service the inlet filters. The cartridge can be accessed from the front.

Check that the diverter is correctly positioned. Ensure water isolation valves are fully open. Clean any blockages in the shower head nozzles or handset by soaking in a vinegar solution. Check and clean inlet filters which require rear access.

Ensure hot and cold water supplies are connected correctly and providing adequate pressure. The thermostatic cartridge may require cleaning or replacement if temperature regulation is consistently poor. Ensure the correct installation and alignment of the valve.

The diverter mechanism may have debris. Attempt to flush the system. If the issue persists, the diverter may need servicing or replacement, which requires accessing the valve assembly.

Check all plumbing connections are secure. Ensure any seals or washers are correctly seated and intact. If leaking from the valve body, the internal cartridge or seals may be faulty and require replacement.