Ryobi 30cm 3-in-1 Mower Kit - RY18LMC30A-120

The Ryobi 30cm 3-in-1 Mower Kit uses Ryobi 18V ONE+ batteries. The battery is sold separately.

Follow the instructions in the manual to remove the spool and replace the trimmer line. Ensure the line is wound correctly.

Use the lever located on the mower deck to select one of the four cutting height settings.

For safety reasons and optimal performance, it's recommended to mow when the grass is dry. Wet grass can clog the mower and reduce cutting efficiency.

Inspect the blade regularly and sharpen it as needed. If the mower struggles to cut the grass cleanly, it's time to sharpen or replace the blade.

Warranty information can be found in the product documentation or on the Ryobi website.

Use a brush or cloth to remove grass clippings from the mower deck and the trimmer head. Do not use water or solvents on the motor.

Store the mower in a dry place, away from direct sunlight and extreme temperatures. Remove the battery before storing.

Ensure the battery is fully charged and properly inserted. Check the power switch and make sure it is turned on.

Check if the line is broken or tangled. Tap the trimmer head on the ground to advance the line using the auto-feed function. Replace the spool if necessary.

Ensure the cutting blade is sharp and properly installed. Check the cutting height adjustment to make sure the mower is set to the desired height. Ensure the deck is level.

Make sure the shaft is twisted into the edging position. Check for any obstructions that might be preventing the blade from spinning.