Roofing Wall Breathable Membrane - 100g/m2 - 1.5m Wide - 3 Layer Permeable

Its primary function is to allow moisture vapor from inside the building to escape the roof structure while preventing external water (rain, snow) from entering, thereby protecting the building fabric and insulation.

The UV-stabilized surface provides protection for up to 6 weeks during installation. It is essential to cover it with the final roofing or cladding material within this period.

This membrane is primarily designed for pitched roofs and walls. For flat roofs, specific membrane types designed for those applications should be used.

The membrane is rated at 100g/m2, indicating its density and material weight.

Seams are typically sealed by overlapping the material according to manufacturer guidelines (usually 100-150mm) and can be further secured with specialized tapes or adhesives recommended by the manufacturer for optimal airtightness and water resistance.

Yes, its durable construction and secure installation make it suitable for pitched roofs and walls, providing a good barrier against wind, especially when installed correctly as per guidelines.

The membrane is 1.5 meters wide. It is available in different roll lengths, such as 20m or 50m, to suit various project sizes.

Ensure proper handling and cutting techniques. Use a sharp knife for clean cuts. For small tears, use manufacturer-approved repair tape. Ensure adequate support from the underlying structure.

Check for proper drainage and overlap. Ensure the membrane is installed with a sufficient slope to allow water runoff. Verify that fixings are not creating channels for water ingress.

Verify that the membrane is installed correctly with adequate ventilation where required by design. Ensure external water is not penetrating. The membrane's permeability should allow internal vapor to escape.