Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint! This water-resistant paint is designe...Make a splash with Rust-Oleum Bathroom Wall & Ceiling Paint! This water-resistant paint is designed for bathroom walls and ceilings to withstand moisture and high levels of condensation, leaving a beautiful modern, matt finish. The premium, water-based paint formula is virtually odourless and available in over 100 stunning colours to match any bathroom colour scheme. It can be easily applied by brush or roller to bare plaster, brick or concrete walls, and directly over previously painted walls. Rust-Oleum Bathroom Wall Paint resists cracking, peeling & blistering for up to 6 years before first maintenance when applied according to label instructions. It is water-resistant but not suitable for shower enclosures or areas in constant contact with water. The paint is scrubbable for easy cleaning (Tested to ISO 11998 Class 1 Wet Scrub Rated). Coverage is 12m² per litre. For best results, apply two coats. Available in a 2.5L tin. Tester sachets containing 10ml of paint are available for colour selection, providing a 30cm by 30cm test area.
This guide is for homeowners seeking a durable and stylish paint solution for their bathrooms. Rust-Oleum Bathroom Wall & Ceiling Paint in Dusky Pink provides a water-resistant, matt finish, ideal for withstanding moisture. However, it's important to note that this paint is not suitable for areas in constant contact with water, such as shower enclosures.
All features
Colour
Pink
Brand
Rust-Oleum
Extended Product Information
FAQs
How much paint do I need?
Coverage is approximately 12m² per litre. Always buy sufficient paint to complete the job, considering two coats are recommended.
Can I use this paint in a shower?
No, this paint is not suitable for areas in constant contact with water, such as shower enclosures.
How do I clean the paint?
The paint is scrubbable. Use a damp cloth to clean any marks or spills.
What is the drying time?
Allow 2-4 hours of drying time between coats and at least 24 hours for full cure.
What kind of finish does this paint have?
This paint provides a modern, matt finish.
Can I apply this paint over existing paint?
Yes, you can apply this paint directly over previously painted walls, provided the existing paint is sound and the surface is properly prepared.
What colors are available?
The paint is available in over 100 colours. Tester sachets are available to help you choose the right colour.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Sand glossy surfaces.
Color is not as expected.
Ensure you have the correct color by testing with a tester sachet before applying to the entire surface. Apply two coats.
Paint is taking too long to dry.
Ensure proper ventilation during and after application. Check the room temperature and humidity levels.
Pros and Cons
Pros
Water-resistant properties protect against moisture damage.
Available in a wide range of colors for customization.
Easy to apply with a brush or roller.
Durable and long-lasting finish.
Low odor formula for a more pleasant application experience.
Cons
Not suitable for areas in direct, constant contact with water.
Requires two coats for optimal results.
Surface must be prepared prior to painting.
Limited to a matt finish, no other finishes are available.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, mildew, or grease. Lightly sand glossy surfaces.
Application: Stir the paint thoroughly. Apply two coats, allowing the first coat to dry completely before applying the second.
Application Tools: Use a brush or roller suitable for water-based paints.
Drying Time: Allow 2-4 hours of drying time between coats and at least 24 hours for full cure.
Cleaning: Clean brushes and rollers with warm, soapy water immediately after use.
Compatibility: Suitable for use on bare plaster, brick, concrete, and previously painted walls.
Care: The paint is scrubbable. Clean any marks or spills with a damp cloth.