HammerHead Showers Shower Heads - CHROME - 2.5 GPM

This showerhead has a maximum flow rate of 2.5 gallons per minute (GPM), which is the industry standard for high-performance showerheads.

The HammerHead Showers showerhead is made entirely of metal, designed for durability and to prevent leaks.

You can adjust the spray angle by rotating the brass pivot ball located where the showerhead connects to the shower arm. It offers up to 23 degrees of adjustability.

Yes, you can switch between a high-pressure spray and a rain shower spray by rotating the knob located on the showerhead.

No, installation is designed to be easy and typically requires no tools. It screws directly onto a standard 1/2" shower arm.

Ensure the showerhead is properly tightened and check for any obstructions. The metal nozzles are designed to boost pressure, but external factors like home water pressure can also play a role.

It's recommended to clean the nozzles periodically, especially in areas with hard water, to maintain optimal performance. A quick wipe-down after each use and a deeper clean with vinegar every few months should suffice.

Ensure the showerhead is tightly screwed onto the shower arm. Check for any blockages in the nozzle openings or within the shower arm itself. Verify that the flow restrictor has not been inadvertently reinserted if it was removed.

Hand-tighten the showerhead further. If leaking persists, remove the showerhead and check the threads on both the shower arm and the showerhead for damage or debris. Consider using plumber's tape on the shower arm threads.

Ensure the adjustment knob is turned firmly. Check if there is any debris obstructing the mechanism. If the knob feels stuck, try gently wiggling it while applying slight turning pressure.

Mineral deposits can clog the nozzles. Soak the showerhead in a mixture of equal parts white vinegar and water for a few hours, then rinse thoroughly and gently scrub the nozzles.