Bostik A100 Showerproof Wall Tile Adhesive - White - 10L
Best current price£50.86from Bradfords
Best offers
Shopping.co.uk recommended and popular offers
Bradfords£50.86Visit shop Bostik A100 Showerproof Wall Tile Adhesive 10Ltr - White
Visit shopBradfords£50.86Visit shop One Offer
1 offer from £50.86
View price history by clicking the chart icon.
Product Information
Full details
The Bostik A100 Showerproof Wall Tile Adhesive is designed for DIY enthusiasts and homeowners looking to fix ceramic wall tiles to most internal surfaces, offering a key benefit of high bonding strength for kitchens, bathrooms, and domestic shower walls. A key caveat is its unsuitability for floors, external use, or areas of continuous immersion. This ready-mixed, white adhesive ensures a flawless finish and quick project completion, setting in just 24 hours.
All features
| Colour | White |
|---|---|
| Model Part Number | A100 |
| Brand | Bostik |
Extended Product Information
FAQs
Can this adhesive be used for floor tiles?
No, the Bostik A100 Showerproof Wall Tile Adhesive is specifically designed for wall applications only and is not suitable for floors.
Is this adhesive suitable for outdoor use?
No, this adhesive is formulated for interior use only. It is not suitable for external applications.
Can I use this in a swimming pool area?
This adhesive is not recommended for areas of continuous immersion, such as swimming pools. It is designed for domestic shower walls, kitchens, and bathrooms.
What type of tiles can I fix with Bostik A100?
It is designed for fixing ceramic wall tiles and some porcelain tiles (up to 150mm x 150mm).
How long does it take for the adhesive to set?
The adhesive sets in approximately 24 hours, allowing for efficient project completion.
Do I need to mix this adhesive before use?
No, the Bostik A100 Showerproof Wall Tile Adhesive is ready-mixed and can be used straight from the tub.
What surfaces is this adhesive suitable for?
It is suitable for most internal surfaces including plaster, sand and cement rendering, plasterboard, old glazed tiles, and tile backerboards.
Troubleshooting
Tiles not adhering firmly
Ensure the surface was properly prepared (clean, dry, free from dust/grease). Check that the adhesive was applied evenly with sufficient coverage, especially using the solid bed method for shower walls. Verify tile compatibility and substrate suitability.
Adhesive is too thick or too thin
This product is ready-mixed and should be used as supplied. If it appears unusually thick, ensure it has not been stored in freezing conditions. If too thin, it may indicate improper storage or contamination. Contact manufacturer support if issues persist.
Grout discoloration
The white color of the adhesive is designed to prevent discoloration. Ensure consistent application and proper grout cleaning post-installation to maintain the intended aesthetic.
Slow setting time
Ensure correct application thickness and environmental conditions (temperature and humidity). Very low temperatures or high humidity can slow the setting process. Avoid disturbing tiles until fully set.
Pros and Cons
Pros
- Ready-mixed for immediate use, saving preparation time.
- Fast setting in 24 hours allows for quicker project completion.
- White color prevents grout discoloration for a better aesthetic finish.
- Excellent adhesion to a variety of common interior wall surfaces.
- Suitable for use in domestic shower areas when applied correctly.
Cons
- Not suitable for floor tiling.
- Not suitable for external use.
- Not recommended for areas of continuous immersion like swimming pools.
- Only suitable for ceramic tiles and some smaller porcelain tiles.
- Backgrounds must be water-resistant for shower applications.
Setup, Compatibility & Care
Setup:
Ensure the surface is clean, dry, and free from dust, grease, and loose material. For porous surfaces like plaster or plasterboard, a primer may be beneficial. Apply the adhesive evenly to the substrate or the back of the tile using a notched trowel.
Compatibility:
Suitable for ceramic tiles and some porcelain tiles (up to 150mm x 150mm). Compatible with surfaces such as plaster, sand and cement rendering, plasterboard, old glazed tiles, and tile backerboards. Not suitable for floors, external use, or areas of continuous immersion. Backgrounds must be water-resistant for shower applications.
Care:
Store in a cool, dry place away from extreme temperatures. Keep the container tightly sealed when not in use. Clean tools and spills immediately with water. Once set, cleaning is more difficult.