VonHaus Submersible Water Pump - 400W Water Drainage Pump with 8m Hose
This 400W motorized water pump rapidly empties water from pools, hot tubs, ponds, flooded rooms, a...This 400W motorized water pump rapidly empties water from pools, hot tubs, ponds, flooded rooms, and other bodies of water up to 7m deep, with a maximum drainage rate of 7500L/H. It can uptake grains up to 35mm wide, allowing you to drain dirty water without clogging. The pump includes an 8m long hose and a 10m long mechanically sealed power cable for extended reach. A float switch automatically turns the unit off when water is depleted, and a thermal cut-off mechanism regulates temperature, allowing for safe, unattended operation. Dimensions: L23 x D15 x H30.5cm. Hose length: 8m. Power cable length: 10m.
This guide is for owners of the VonHaus Submersible Water Pump. It helps you understand how to effectively use the pump for draining water from various sources, such as pools, flooded rooms, and ponds. This pump offers rapid water removal with a high flow rate, but it's important to be aware of its operational depth limitations.
All features
Model Part Number
400W Water Drainage pump with 8m Hose
Brand
VonHaus
Extended Product Information
FAQs
What is the maximum depth the pump can operate at?
The pump can operate in water up to 7 meters deep.
Can I use this pump for saltwater?
No, this pump is designed for fresh water use only.
What kind of debris can the pump handle?
The pump can handle solids up to 35mm in size.
How do I clean the pump?
Rinse the pump with clean water after each use. Remove any debris from the intake screen.
Does the pump have a warranty?
Please refer to the product documentation or retailer for warranty details.
Can I leave the pump running unattended?
Yes, the float switch allows for unattended operation, automatically turning the pump off when the water level is low.
What is the length of the power cable?
The power cable is 10 meters long.
What is the drainage rate of the pump?
The pump can drain up to 7500 liters per hour.
Troubleshooting
Pump does not turn on.
Check the power supply and ensure the pump is properly plugged in. Verify that the float switch is not obstructed.
Pump is not pumping water.
Check for blockages in the intake or hose. Clean the intake screen. Ensure the pump is fully submerged and within the operational depth.
Pump turns off unexpectedly.
The thermal cut-off may have been activated due to overheating. Allow the pump to cool down before restarting. Check for obstructions that may be causing the motor to work harder.
Pros and Cons
Pros
High flow rate for rapid water removal.
Built-in float switch for automatic operation.
Thermal cut-off for motor protection.
Handles solids up to 35mm, reducing clogging.
Includes an 8m hose for immediate use.
Cons
Limited to a maximum submersion depth of 7m.
Requires a power outlet for operation.
May not be suitable for extremely fine particle filtration.
Setup, Compatibility & Care
Setup: Connect the 8m hose to the pump outlet. Ensure the hose is directed to a suitable drainage area. Plug the pump into a grounded power outlet. Submerge the pump completely, ensuring it's stable and not resting on the bottom where it might suck up debris.
Compatibility: Compatible with standard electrical outlets. The pump is designed for use in fresh water and can handle water with some debris. Avoid using it in highly corrosive environments or with flammable liquids.
Care: After each use, rinse the pump with clean water. Periodically check and clean the intake screen to prevent blockages. Store the pump in a dry place when not in use. Inspect the power cable for any damage before each use.