High Gloss Polish Super Finish Plus 3800 - menzerna - 22992.281.001

Its primary purpose is to create a perfect mirror finish by removing polishing marks, micro-scratches, and holograms, especially on dark-colored paints.

Yes, it is suitable for all car colors, but it is particularly effective and recommended for dark-colored paints where imperfections are most visible.

While designed for orbital polishers and hand application, it can be used with a rotary polisher, but requires more care and skill to avoid introducing new defects due to its fine abrasive nature.

Yes, Menzerna Super Finish Plus 3800 is silicone-free, making it safe for use in environments where subsequent paint application or correction is planned.

For optimal results with machine application, the Menzerna green Soft Cut Foam Pad is recommended. It is designed to work effectively with the polish's fine abrasives.

For machine application, six small drops for a 50x50cm area is the recommended starting point. Adjust as needed based on pad condition and paint surface.

The abrasives break down as you polish. Continue working the polish until the milky film becomes slightly translucent, indicating the polishing process is complete for that section.

Ensure you are using the correct pad (Menzerna green Soft Cut Foam Pad recommended) and that it is clean. Increase machine speed slightly or apply slightly more pressure. Check if the paint surface was adequately pre-cleaned.

This can occur if too much pressure is applied, the machine speed is too high, or the pad is dirty. Reduce pressure, adjust machine speed, and ensure a clean pad and microfiber towel are used for buffing off.

Work in smaller sections (e.g., 50x50cm). Reduce the amount of polish applied per section, or if working in warm conditions, consider using a slightly more open-cell pad or a damp applicator pad (sparingly).

Ensure the polish has been worked until it becomes translucent. Use a clean, high-quality microfiber towel for removal. If residue is stubborn, a light mist of Menzerna Control Cleaner can help loosen it.