Best current price£30.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£30.00Visit shop 1 Box 10 Pieces Cornices Mouldings 20 M Orac Decor Cb500n Basixx 4250691763296
Visit shop1 offer from £30.00
View price history by clicking the chart icon.
The Orac Cornices Mouldings BASIXX CB500 are designed for homeowners and DIY enthusiasts looking to add professional architectural detail to their interiors with minimal effort. These lightweight mouldings offer a clean, classic aesthetic that elevates a room's transition between walls and ceilings, though they require careful handling due to their foam composition and specific adhesive needs.
| Colour | White |
|---|---|
| Series | BASIXX |
| Model Part Number | CB500 |
| Brand | Orac |
Yes, provided you use the recommended DecoFix Power adhesive for extra moisture resistance.
Use water-based, solvent-free paints to ensure the foam material is not damaged.
No, the mouldings come pre-primed in white, so they are ready for your top coat immediately.
Use a fine-toothed hand saw with a mitre box to ensure clean, accurate angle cuts.
These are primarily designed for residential use where the risk of physical impact is low.
The flexibility of the Durofoam allows it to conform to slight wall irregularities, though a good adhesive bond is crucial.
Ensure the wall surface is clean and dust-free; if using porous surfaces, ensure DecoFix Pro is applied uniformly.
Use a specialized filler for foam mouldings to fill the seams, then sand smooth once dried before painting.
Small dents can be filled with a lightweight, water-based filler before painting; take care to handle the strips gently during installation.
For a secure installation, ensure the mounting surface is clean, dry, and free of dust. Use `DecoFix Pro` for standard indoor applications on porous surfaces, or `DecoFix Power` if the environment is humid or requires a higher strength adhesive bond. Apply a thin bead of adhesive to the back of the moulding and press firmly against the wall-ceiling junction. Use nails or masking tape to hold the strips in place until the adhesive cures. Once installed, fill any gaps in the mitre joints with a compatible filler, then sand lightly and apply your top coat of paint. Regularly dust the mouldings with a soft cloth to maintain their appearance.
