Best current price£105.43from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£105.43Visit shop Eaton Industries Xcomfort Switching Actuator Bus System - 240694
Visit shop3 offers from £105.43 - £120.98
View price history by clicking the chart icon.
The Eaton XComfort Switching Actuator CSAU-01/02 is designed for homeowners and small business owners seeking enhanced control over their electrical devices and energy management. Its key benefit is the potential-free switching capability, allowing it to control various appliances like lighting, heating, and alarm systems with flexibility. A minor caveat is its specific integration within the xComfort bus system.
| Series | xComfort |
|---|---|
| Model Part Number | 240694 |
| Brand | Eaton |
Potential-free switching means the actuator's output contacts are isolated from its own power supply. This allows you to switch loads that may require a different voltage or have their own power source, as long as the current is within the 8A limit.
The actuator is controlled via the Eaton xComfort RF bus system. While you can wire a standard switch to a manual input if the system supports it, primary control is through xComfort wireless devices or the central control unit.
The actuator has a maximum switching current of 8A, which translates to a maximum power handling capacity of approximately 1840W at 230V.
The actuator provides a switched connection. The load device itself will typically require its own neutral and ground connections, which are wired independently of the actuator's switching terminals.
It is designed for flush mounting and can be installed in standard electrical installation boxes, branch boxes, or directly within the housing of a light fixture, provided there is adequate space and ventilation.
If the central xComfort system loses power, the actuator will revert to its last known state or a pre-defined safe state, depending on system configuration. It will not be controllable remotely until the system is restored.
No, this actuator is specifically designed for and compatible only with the Eaton xComfort radio frequency (RF) bus system.
Ensure the actuator is properly powered and within range of the xComfort system's central unit. Verify that it has been correctly paired. Check the system's status for any network errors.
Confirm that the connected device is compatible and within the 8A current limit. Check the wiring to the actuator's output terminals. Ensure the actuator itself is receiving power.
Check for potential RF interference from other devices. Ensure the actuator is not excessively distant from the central control unit. Verify the integrity of the wiring.
Verify the 'potential-free' aspect is understood; the actuator switches the live connection to the device. Ensure the device has a separate neutral and ground connection if required. Check that the load is not exceeding the 8A limit.
Setup:
Compatibility:
Care:
