Best current price£12.79from eBay
Shopping.co.uk recommended and popular offers
eBay£12.79Visit shop Infinity Wax A.I.O. Polish 250mL Medium Cut Paintwork Scratch & Gloss Enhancer
Visit shop
B&Q£67.99Visit shop - 6X Infinity Wax A.i.o. Polish 250Ml Medium Cut Paintwork Scratch Gloss Enhancer
Visit shop8 offers from £12.79 - £84.99
View price history by clicking the chart icon.
The Infinity Wax A.I.O. Polish 250mL is designed for automotive enthusiasts and detailers seeking to correct moderate paintwork defects and add protection in a single step. Its key benefit is the ability to remove minor scratches, swirls, and restore clarity efficiently while providing up to 3 months of durable Si02 protection. A potential caveat is that it's a medium-cut compound, so it may not be suitable for very deep scratches. This versatile product combines a medium-fine cutting compound with advanced polish technology and Si02 protection, making single-stage detailing easier and more effective.
| Model Part Number | IFW319 |
|---|---|
| Brand | Infinity Wax |
A.I.O. Polish is a single-stage paint correction product that includes Si02 protection for durability up to 3 months. A dedicated ceramic coating typically offers longer-lasting protection (1-3+ years) but requires more rigorous surface preparation and application.
While it can be used on the paint finish of trim, it's generally recommended to use dedicated trim restorers for unpainted or textured plastic to avoid potential staining or uneven results. Test on an inconspicuous area first if attempting on trim.
The manufacturer states the Si02 protection can last up to 3 months, depending on environmental conditions, washing frequency, and maintenance.
Yes, Infinity Wax A.I.O. Polish is safe for use on all modern automotive paint finishes, regardless of color. However, darker colors may show residual haze more readily if not fully buffed off.
Yes, you can apply a conventional wax or sealant over the Si02 layer if you desire additional gloss or protection. However, it's generally not necessary immediately after application.
Start with 3-4 small pea-sized drops on your applicator pad. Adjust as needed based on the pad's absorbency and the working area. The goal is to have enough product to work the section without it drying out too quickly.
For defect correction, a foam cutting or polishing pad is generally recommended. For lighter correction or finishing, a softer foam pad can be used. Always ensure your pad is clean and suitable for the task.
Ensure all product residue is completely buffed off with a clean microfiber towel. You may be using too much product, or not working it long enough for the abrasives to fully break down. Try a second, lighter buff with a clean towel.
The defect may be too deep for a medium-cut polish. Try a more aggressive compound if necessary. Ensure you are using adequate pressure and pad compatibility for the task.
The surface may be too hot, or you may be working too large an area at once. Apply to a cooler surface and work in smaller sections. Ensure the applicator pad is sufficiently primed with product.
This can sometimes occur if the abrasives do not fully break down or if too much pressure is applied. Try reducing pressure, using a finishing pad, or working the product for a longer duration until it clears completely. A follow-up with a finishing polish may be beneficial.
Setup: No special setup is required. Ensure the paint surface is clean, dry, and cool to the touch before application. Work in a shaded area.
Compatibility: Suitable for use on all modern automotive paint finishes, including clear coats. Can be applied by hand using foam applicator pads or by machine polisher (dual-action or rotary).
Application:
Care: Store the bottle in a cool, dry place away from direct sunlight. Keep the cap tightly sealed when not in use. Ensure applicator pads and microfiber towels used with the product are thoroughly cleaned after each use to prevent cross-contamination and maintain their effectiveness.
