Power-TEC Lateral Tension Puller Glue Pad Set - 8 Piece Set - 92736
Best current price£41.65from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£41.65Visit shop Power-TEC Lateral Tension Puller Glue Pad Set 8pc 92736
Visit shopeBay£41.65Visit shop All Offers
3 offers from £41.65 - £49.58
View price history by clicking the chart icon.
eBayPower-TEC Lateral Tension Puller Glue Pad Set 8pc 92736
Free delivery in 1–3 days
£41.65
Visit shop
POWER-TEC 92736 Lateral Tension Puller Glue Pads Flat & Concave 105x49 8 PiecesFree delivery in 1–3 days£48.83Visit shop →
Power-TEC Lateral Tension Puller Glue Pad Set 8 Piece Set - 92736Free delivery in 1–3 days£49.58Visit shop →
Used Offer
1 offer from £15.78
View price history by clicking the chart icon.
eBayPowerTec 92736 Lateral Tension Puller Glue Pad Set 8pcs
Free delivery in 1–3 days
£15.78
Visit shop
Product Information
Full details
This Power-TEC Lateral Tension Puller Glue Pad Set is designed for automotive repair professionals and DIY enthusiasts needing to create pulling points for dent repair. Its key benefit is providing a versatile range of pad shapes and sizes to adapt to various surfaces, enabling effective lateral tension pulling. A potential caveat is that optimal performance, especially on larger areas, may require pre-warming the tab with a hot air gun for better glue adhesion.
All features
| Model Part Number | 92736 |
|---|---|
| Brand | PowerTec |
Extended Product Information
FAQs
What types of dents are these pads best suited for?
These pads are ideal for pulling dents using lateral tension methods, effective on various types of damage from minor dings to larger impact areas, especially when used with compatible Power-TEC puller frames.
Do I need to use special glue with these pads?
Yes, these pads are designed to be used with specialized glue sticks formulated for glue pulling applications in automotive repair. The glue is not included in this set.
How do I clean the glue pads after use?
Gently scrape off excess glue with a plastic scraper. You can then wash the pads with mild soap and water if needed. Ensure they are completely dry before storage.
Can I use these pads with puller systems from other brands?
These pads are specifically designed for compatibility with Power-TEC Lateral Tension Puller Frames (92733, 92734, 92735) and pull mounts (92737). Use with other brands is not guaranteed.
What is the difference between Type 1/2 and Type 3/4 pads?
Type 1 and Type 2 pads are larger (105 x 49mm) and suitable for broader pulling areas, while Type 3 and Type 4 pads are shorter (52 x 49mm) and designed for more targeted pulling or working in confined spaces.
Do the pads come with a puller frame?
No, this product is a set of 8 glue pads only. The compatible Power-TEC Lateral Tension Puller frames and multi-angle pull mounts must be purchased separately.
Is it necessary to heat the panel before applying glue?
For optimal adhesion, especially on large areas or cooler surfaces, it is recommended to pre-warm the tab area with a hot air gun. This helps the glue form a stronger bond.
Troubleshooting
Glue pad not adhering strongly
Ensure the panel surface is clean and free of grease or debris. Try pre-warming the tab area with a hot air gun, especially for larger pads or on cooler surfaces, to improve glue adhesion. Use the correct type and amount of glue recommended for glue pulling.
Pad detaches during pulling
Verify that the correct pad type and size are being used for the dent's characteristics. Re-apply glue, ensuring even coverage, and allow adequate curing time before pulling. Check the temperature of the working environment; extreme cold can affect glue performance.
Difficulty attaching pad to puller frame
Confirm that you are using a compatible Power-TEC puller frame or mount as specified. Ensure there is no debris obstructing the connection point on both the pad and the puller frame.
Pros and Cons
Pros
- Provides a variety of pad shapes and sizes for adaptability.
- Designed for use with specific Power-TEC pulling equipment.
- Offers both large and short pad options for different repair needs.
- Enhances the versatility of lateral tension puller systems.
Cons
- Requires compatible Power-TEC puller frames and potentially pull mounts.
- May need additional tools (hot air gun) for optimal glue adhesion on certain surfaces.
- Glue and puller frames are sold separately.
- Primarily suited for use with glue pulling methods.
Setup, Compatibility & Care
Setup: The glue pads are designed to attach directly to the pulling mechanism of compatible Power-TEC Lateral Tension Puller frames. Ensure the puller frame is securely assembled and ready for attachment. Select the appropriate glue pad for the dent size and contour.
Compatibility: These pads are explicitly designed for use with:
- Power-TEC 250 Lateral Tension Puller Frame (Part No. 92733)
- Power-TEC 450 Lateral Tension Puller Frame (Part No. 92734)
- Power-TEC 900mm Lateral Tension Puller Frame (Part No. 92735)
- Power-TEC Lateral Tension Multi-Angle Pull Mounts (Part No. 92737)
Ensure you are using these specific Power-TEC products for guaranteed compatibility and performance.
Care: After each use, carefully remove any residual glue from the pad surface. A plastic scraper can be used gently to avoid damaging the pad material. Clean the pads with a mild detergent and water if necessary, and allow them to air dry completely before storing. Store the pads in a clean, dry environment, ideally in their original packaging or a protective case, to prevent contamination and damage.