Festo Compact Cylinder - ADNGF Series - 80mm Bore - 40mm Stroke - Double Acting

At 6 bar air pressure, the theoretical advancing force is 3016 N.

This cylinder complies with the ISO 21287 standard for compact cylinders.

Yes, the cylinder can be operated without sensors. The magnetic piston is for optional sensor mounting to detect position.

The elastic cushioning rings absorb shock at the end of the stroke, providing a smoother motion, reducing noise, and extending the lifespan of the cylinder and connected components.

It is recommended to use filtered compressed air. Depending on the application and specific seal material, lubrication may be recommended or not required. Consult Festo's general pneumatic guidelines for details.

The typical maximum operating pressure for cylinders in this series is 10 bar. Always refer to the specific product datasheet for precise specifications.

Mounting accessories are typically attached to the end caps or through the profile groove on the cylinder body, depending on the type of accessory and the cylinder's configuration. Ensure accessories are compatible with the ISO 21287 standard.

Check air supply pressure and ensure it is within the specified range. Verify that pneumatic lines are correctly connected to the ports and that there are no blockages or leaks. Ensure the control valve is functioning correctly.

Ensure the air supply is properly filtered and, if required, lubricated. Check for any obstructions or misalignment in the cylinder's path. Ensure the elastic cushioning is not damaged and that the load is within the cylinder's capacity.

Confirm the correct type of proximity sensor is used and that it is securely mounted in the cylinder's profile groove. Check sensor wiring and ensure it is properly connected to the control system. Verify the magnetic field is not obstructed.

Verify that the elastic cushioning rings are intact and properly seated. Ensure the air pressure is not too high for the cushioning to be effective. Reduce operating speed if necessary.