Furniture Clinic Laminate Floor Polish - 500ml

The frequency depends on foot traffic and wear. For best results, reapplication is typically recommended every 6-12 months, or when signs of wear begin to appear.

This polish is specifically formulated for laminate flooring. While it may offer some temporary benefit on other resilient floors, its performance and long-term effects on vinyl or LVT are not guaranteed. Always test in an inconspicuous area first.

For removal, use a specialized laminate floor polish remover or a strong degreaser cleaner, following the product's instructions. Ensure all residue is rinsed thoroughly before reapplying.

No, this polish enhances water resistance by sealing the surface, but it does not make laminate flooring waterproof. Standing water should still be cleaned up promptly to prevent damage to the laminate's core.

A 500ml bottle covers approximately 50 square meters (50 m²), providing ample coverage for most rooms.

This polish is designed to add a glossy sheen to your laminate floors.

Ensure the floor was perfectly clean and dry before application. Apply thin, even coats and avoid over-application or pooling. If streaks are present after drying, a light buffing might help, or a complete reapplication after proper stripping may be necessary.

Verify that the temperature and humidity conditions are within reasonable limits (avoid very cold or damp environments). Ensure only a thin coat was applied. If it's still tacky after several hours, ventilation might help.

While designed to be non-slip, excessive application can sometimes lead to a slicker surface. Ensure the product was applied thinly and evenly. Allow sufficient drying time. If the issue persists, buffing with a slightly abrasive pad might reduce the slip, or a full removal and reapplication with a lighter coat may be needed.