Festo Compact Cylinder - ADN Series - 63mm Bore - 10mm Stroke

The primary advantage is its significantly compact design, adhering to ISO 21287, which offers up to 50% space savings compared to standard ISO 15552 cylinders.

The PPS system automatically adjusts the damping effect based on the speed of the piston as it approaches the end of its stroke, providing smooth deceleration without manual adjustment.

While the cylinder is designed for durability, a lubricated air supply can extend its overall lifespan, especially in demanding applications. Check the specific operating manual for recommendations.

With a 63mm piston diameter and an operating pressure of 6 bar, the theoretical advance force is 1870 N.

No, position sensing is optional. The magnetic piston allows for the easy addition of magnetic proximity switches if position monitoring is required for your application.

The standard operating pressure range is typically 1 to 10 bar, but always refer to the product's technical data sheet for precise specifications.

The stroke length should be determined by the required movement distance of the component being actuated. For this specific model, the stroke is fixed at 10mm, suitable for short, precise movements.

Check air supply pressure, ensure valve is correctly actuated, verify pneumatic connections are secure and ports are not blocked.

Verify air supply quality (moisture, particles), check for internal wear or damage, ensure cushioning is not set too high for the speed.

Check for obstructions, ensure sufficient air pressure, verify stroke length is not physically limited by external factors.

Ensure the magnetic piston is correctly aligned with the sensor, check sensor wiring and settings, confirm sensor is compatible with magnetic field strength.

The self-adjusting cushioning should mitigate noise. If excessive noise persists, check for hard stops or ensure cushioning is properly engaged.