Flomasta White Type 22 Double Panel Radiator, (W)1200mm X (H)600mm - White

A Type 22 radiator features two steel panels with two integral convector fins between them, offering higher heat output compared to Type 11 radiators of similar size.

Radiator sizing depends on room dimensions, window size, insulation levels, and desired temperature. Consult a heating professional or use an online BTU calculator for precise recommendations.

No, this is a hydronic radiator designed for central heating systems. It is not compatible with electric-only heating setups.

The specific heat output (BTU or Watts) varies based on system water temperature. Refer to the product's technical specifications for detailed heat output data.

You should bleed your radiators whenever you notice cold spots, especially at the top, or if the system has been recently drained and refilled. Typically, checking once a year before the heating season is advisable.

Yes, you can paint this radiator. Ensure it is clean and dry, and use a paint specifically designed for radiators to avoid damage or reduced performance.

Please refer to the retailer or manufacturer's documentation for specific warranty information, as it can vary.

Check if the central heating system is on and the thermostat is set correctly. Bleed the radiator to remove any trapped air. Ensure radiator valves are fully open.

Turn off the heating system and isolate the radiator. Tighten any loose fittings. If leaks persist, contact a qualified plumber for repair.

Gurgling sounds often indicate trapped air, which can be resolved by bleeding the radiator. Banging noises might suggest water hammer in the system, requiring a professional inspection.

Inspect the damage. Minor scratches can sometimes be touched up with appropriate paint. Significant damage may require professional assessment or replacement.