Whiteline Rear Camber/Toe Shim Correction Kit - KCA383

The KCA383 kit is designed to adjust and correct the rear camber and toe angles on compatible vehicles, aiming to improve tire wear and handling.

The kit provides approximately +0.5 degrees of camber reduction and 2.5mm of toe-in reduction per side from the base settings.

While installation is possible, it requires specialized tools and knowledge of suspension systems. Professional installation by a qualified mechanic is highly recommended for accurate results.

The final outcome may vary slightly due to natural rear axle flex in the vehicle. Professional alignment equipment is necessary to confirm the final settings.

Whiteline Performance Products, including this kit, are covered by a 3-year warranty against material and workmanship defects for the original purchaser. Installation components have a 1-year warranty.

This kit is typically needed if you are experiencing uneven tire wear on the rear tires, or if your vehicle's alignment specifications are outside the desired range after suspension modifications or due to normal wear.

No, this kit is designed for specific vehicle models. Always check Whiteline's compatibility guide or consult a professional to confirm fitment for your vehicle.

Verify installation of shims is correct and all hardware is tightened to specification. Re-check for rear axle flex and consult a professional alignment technician. Ensure no other suspension components are worn or damaged.

Confirm that the shims have been installed on the correct side and orientation. Double-check all other suspension and steering components for wear or damage. A second professional alignment check may be necessary.

Ensure all components were reassembled correctly and tightened properly. Check for any interference between new components and existing suspension parts. If noise persists, professional inspection is recommended.