Best current price£19.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.11Visit shop B&Q - Uviwax Non Yellowing Uv ProtectionClearSatin125Ml
Visit shop3 offers from £19.11 - £103.88
View price history by clicking the chart icon.
Osmo Uviwax UV-Protection Oil (White, Transparent) is designed for woodworkers and DIY enthusiasts seeking durable, long-lasting protection against UV damage and daily wear. Its key benefit is a non-yellowing, microporous finish that breathes with the wood, preventing cracks and flakes, and it’s safe for children's toys. A caveat is that it must be applied solely to raw wood, and a trial application is always recommended.
| Colour | White |
|---|---|
| Model Part Number | 7266 |
| Brand | Osmo |
No, Osmo Uviwax UV-Protection must be applied solely to raw wood. Old paints and lacquers must be completely removed before application.
No sanding is necessary for spot repairs or future applications on wood treated with Osmo Uviwax UV-Protection.
The coating temperature should be at least +10°C.
Yes, it provides UV protection, water, and dirt resistance, making it suitable for various interior and exterior wood surfaces.
The finished surface is water and dirt resistant and can generally be cleaned with a damp cloth. Old microporous stains should be cleaned thoroughly.
No, Osmo Uviwax UV-Protection is a unique, non-yellowing oil that resists yellowing, maintaining the natural appearance of the wood.
Yes, the product is saliva-resistant and sweatproof, making it suitable for children's toys.
Ensure the wood surface was clean, dry, and free of contaminants. Check that the ambient temperature was at least +10°C during application and drying. Verify that the product was applied solely to raw wood and not over old finishes.
Stir the product thoroughly before and during application. Ensure consistent application technique. For difficult woods, a trial application is recommended to assess absorption and finish.
This product is non-yellowing. Discoloration might be due to the original wood color or an issue with a previous finish. Always perform a trial application on an inconspicuous area.
This can occur if applied too thickly or if drying conditions were poor. Ensure a thin, even coat and adequate ventilation. If still sticky after a few days, a very light scuff sand might be needed, followed by a reapplication of a thin coat.
Preparation is Key: Ensure wood surfaces are clean, dry, and frost-free, with a moisture content not exceeding 18%. For resinous woods like Larch, degrease with Osmo Brush Cleaner and Thinner. Remove old paints and lacquers completely; only apply to raw wood. If necessary, sand raw wood with fine sandpaper before application. During sanding, wear a dust mask.
Application: Osmo Uviwax UV-Protection is ready to use and should not be thinned. Stir well before application. The coating temperature must be at least +10°C.
Compatibility: This product is to be used alone and solely applied to raw wood. It is not compatible with previously painted or lacquered surfaces unless they are completely removed.
Care and Maintenance: Clean old microporous stains thoroughly. Wood treated with Osmo Uviwax UV-Protection generally only needs to be cleaned and recoated. For future applications or spot repairs, no sanding is necessary.
