Best current price£9.70from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£9.70Visit shop GARDENA 07332-20 Ball Valve 1/2" Quick Full-Flow 13 mm Hose Connection
Visit shop4 offers from £9.70 - £16.54
View price history by clicking the chart icon.
The Gardena Ball Outlet Valve (MPN: 7333-20) is designed for serious gardeners and homeowners who need to manage water flow efficiently without the mechanical strain of a traditional screw-style tap. It offers high-volume, rapid water delivery for 19 mm (3/4 inch) hoses, making it an excellent choice for irrigation systems and heavy-duty outdoor cleaning tasks. While it provides superior convenience, it is important to note that this valve is specifically sized for G1 threaded connections and 3/4 inch hose diameters, requiring users to verify their existing piping to ensure a leak-free fit.
| Model Part Number | 7333-20 |
|---|---|
| Brand | Gardena |
This model uses a standard 33.3 mm thread, which is classified as G1.
No, this valve is specifically designed for 19 mm (3/4 inch) hose connections.
Yes, it is designed for both indoor and outdoor use, provided the plumbing connection matches the G1 specification.
The valve provides the outlet connection point; ensure you have a compatible 19 mm hose connector to attach your hose.
It is recommended to drain the system. If you live in an area with harsh freezing conditions, removing or fully winterizing the valve is advised to prevent cracking.
Ensure that enough PTFE thread tape was applied to the pipe threads and verify that the valve is tightened properly.
Check for mineral deposit buildup around the pivot point; gently flush with water or a mild descaling agent.
Verify that your supply line is not restricted and ensure the ball mechanism is fully rotated to the open position.
Installation of the Gardena Ball Outlet Valve is straightforward but requires attention to thread alignment. First, ensure the water supply is completely turned off at the main source. Clean the existing pipe threads to remove any mineral deposits or debris that could prevent a tight seal. Apply appropriate thread tape (PTFE) to the male threads of your supply pipe before screwing on the valve. Hand-tighten until secure, using a wrench only if necessary to prevent over-tightening which could crack the housing. To maintain performance, check the connection periodically for leaks, especially after winter freeze-thaw cycles. During extreme winter temperatures, it is recommended to drain the valve completely to prevent water expansion damage.
