Hozelock UVC Hosetail - single

This hosetail is designed for the Hozelock Vorton UV Bioforce and Ecopower filter ranges. However, it will only fit *certain* Bioforce models. It is essential to check your existing hosetail against its dimensions (reduces 40mm to 32mm to 25mm) before purchasing.

The hosetail reduces from a 40mm inlet to a 32mm outlet, and then further to a 25mm outlet. It measures 118mm in length.

No, this hosetail is specifically designed for compatible Hozelock filter models and is not intended for use with other brands or universal applications.

Ensure the hosetail is securely attached to the filter and that your hose is firmly connected to the appropriate reduced outlet. Using a hose clamp can provide an extra secure seal.

This hosetail offers three specific sizes (40mm, 32mm, 25mm). Ensure you are connecting your hose to the correct size outlet. If your hose is not one of these sizes, this hosetail may not be suitable.

It is recommended to check the hosetail during routine filter maintenance, typically a few times a year or whenever you notice changes in water flow or pressure.

Verify that your filter model is one of the compatible Hozelock Vorton UV Bioforce or Ecopower units and that your existing hosetail matches the reduction sizes (40mm to 32mm to 25mm).

Ensure the hosetail is fully seated on the filter inlet. Check that the hose is securely attached to the reduced outlet and consider using a hose clamp for a tighter seal.

Make sure you are using the correct reduced outlet size on the hosetail for your hose diameter. If the hose is stiff, warming it slightly with warm water can make it more pliable.