Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop Stag Tools 3T Tripod Axle Stands Pair Heavy Duty Adjustable Car Van
Visit shop
B&Q£30.99Visit shop B&Q - 3T Tonne Axle Stand Car Van Garage Jack Stand Heavy Duty Lift Tools Sjs001
Visit shopB&Q£160.99Visit shop B&Q - 3T 3 Tonne Hydraulic Trolley Jack Car Van Garage Workshop Tools Shj001
Visit shop10 offers from £22.99 - £160.99
View price history by clicking the chart icon.
The Stag Tools 3 Tonne Tripod Axle Stand Pair is an essential safety tool for automotive hobbyists and professional mechanics who need reliable support while working beneath a lifted vehicle. These stands provide a robust 3-tonne capacity and a versatile height range of 322mm to 490mm, ensuring stability for various service tasks; however, users must strictly adhere to weight limits and only operate them on firm, level ground to prevent accidents.
| Brand | Stag |
|---|
No, you must always use axle stands in pairs to ensure the vehicle remains balanced and stable.
The maximum extension height for these stands is 490mm.
It is highly recommended to use them only on firm, level surfaces like concrete. Dirt or soft asphalt may cause the stand to sink under heavy load.
Never exceed the stated load capacity. Doing so could lead to structural failure, causing serious injury or death.
Listen for the audible click of the ratchet pawl and manually verify that the locking tooth is securely engaged in the column slot before placing weight on the stand.
Check the pawl (locking mechanism) for debris and apply a light coat of machine oil to the teeth to ensure smooth movement.
Verify the floor is level; if the floor is uneven, move the stands to a concrete pad or use a firm, level steel plate beneath them.
To set up these stands, place them on a firm, level surface. After lifting the vehicle with a trolley jack, position the stands under the vehicle's frame or jacking points—refer to your vehicle owner's manual for exact locations. Raise the center column to the required height until the ratchet clicks into place.
For care, wipe down the stands with a clean cloth after every use to remove grease, dirt, or moisture. Inspect the welds and the ratchet teeth periodically for signs of stress, cracks, or rust. Store them in a dry, cool environment to maintain the integrity of the steel.
