Festool Diamond Cutting Disc - Tl-D 125
Best current price£75.00from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£75.00Visit shop Festool Diamond Disc TL-D125 Premium 769162
Visit shopeBay£75.00Visit shop One Offer
1 offer from £75.00
View price history by clicking the chart icon.
Product Information
Full details
This premium diamond cutting disc from Festool is designed for professionals and serious DIYers tackling floor tiles, roof tiles, and concrete roofing tiles. Its key benefit is providing efficient, precise cuts with a narrow 1.20 mm cutting width for minimal material waste. A potential caveat is its specialized nature, meaning it's optimized for specific tile and concrete materials.
All features
| Model Part Number | 769162 |
|---|---|
| Brand | Festool |
Extended Product Information
FAQs
What types of tiles can this disc cut?
This disc is specifically designed for cutting floor tiles, roof tiles, and concrete roofing tiles. It is optimized for these durable materials.
What is the cutting width of this disc?
The cutting width is 1.20 mm, which allows for precise cuts with minimal material removal.
How long does the disc typically last?
The disc offers a very long service life due to its premium diamond construction. Actual lifespan depends on the material being cut and usage intensity.
Can I use this disc on a standard angle grinder?
Yes, provided your angle grinder is a 125 mm (5 inch) model and its RPM rating is compatible with the disc's specifications. Always consult your grinder's manual.
Is this disc suitable for wet cutting?
The product information does not specify wet cutting capabilities. For safety and optimal performance, it is recommended to consult the Festool product manual or use dry cutting methods unless otherwise indicated.
What safety precautions should I take?
Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves. Ensure the work area is well-ventilated and free of debris. Follow all safety instructions for your angle grinder.
Troubleshooting
Disc not cutting efficiently
Check if the disc is correctly mounted and spinning in the proper direction. Ensure you are applying appropriate, consistent pressure. The material may be too hard for the disc, or the disc may be worn out.
Excessive chipping or rough cuts
Reduce the cutting speed or pressure. Ensure the disc is sharp and undamaged. The material being cut might be too brittle for this specific disc type.
Disc wobbling during operation
Immediately stop the grinder and check that the disc is securely fastened. Ensure the mounting flange and spindle are clean and undamaged. If the disc is warped or damaged, replace it immediately.
Pros and Cons
Pros
- Achieves highly precise cuts with a narrow kerf.
- Offers exceptional durability for a long service life.
- Efficiently cuts through various tough tile and concrete materials.
- Designed for professional-level performance and reliability.
Cons
- Best suited for specific materials; may not be optimal for softer tiles.
- Requires a compatible angle grinder for use.
- As a premium product, it may have a higher initial cost compared to general-purpose discs.
Setup, Compatibility & Care
Setup:
- Ensure the angle grinder is unplugged or the battery is removed.
- Securely attach the Festool Diamond Cutting Disc - Tl-D 125 to the angle grinder's spindle using the appropriate flange and nut, following the grinder manufacturer's instructions.
- Tighten the nut firmly using the correct spanner.
- Ensure the guard is correctly positioned for safety.
Compatibility:
- This disc is designed for use with 125 mm (5 inch) angle grinders.
- Confirm your angle grinder's maximum RPM rating is compatible with the disc's specifications.
- Suitable for cutting:
- Floor tiles
- Roof tiles
- Concrete roofing tiles
Care:
- Always allow the disc to cool down before handling or removing it.
- Inspect the disc for any signs of damage (cracks, chips) before each use.
- Store the disc in a dry place, away from moisture and extreme temperatures.
- Clean any dust or debris from the disc surface after use with a dry brush.