Best current price£13.52from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£13.52Visit shop Knightsbridge Sf2000pb Screwless 10 A 1-Gang 2 Way Switch, 230 W, 230 V, Polished Brass 5055559199526
Visit shop1 offer from £13.52
View price history by clicking the chart icon.
The Knightsbridge 10A 1-Gang 2-Way Screwless Switch is designed for homeowners and electricians who prioritize a modern, minimalist aesthetic for their electrical fittings. Its primary benefit is the seamless, screwless front plate that creates a sophisticated, clutter-free look on any wall surface. While it offers superior style, users must note that it requires a minimum mounting back box depth of 16mm, necessitating a quick check of your wall cavity before installation to ensure a proper fit.
| Colour | Bronze |
|---|---|
| Model Part Number | SF2000PB |
| Brand | Knightsbridge |
This switch is rated at 10A.
Yes, 2-way switches can be used for 1-way applications by simply not utilizing one of the traveler terminals.
No, this product is designed for indoor use only and does not feature an IP rating for moisture protection.
Yes, the internal mounting screws for the frame are included.
2-way switching allows you to control a single light or group of lights from two separate switch locations.
You can gently pry the cover off using a small, flat-head screwdriver in the dedicated notch on the side of the plate.
Check that the wiring at the back of both switches is configured correctly for 2-way switching (specifically the common and traveler terminals).
Verify that the mounting plate is not recessed too deeply into the wall; if it is, use longer screws or spacers to bring the plate flush with the wall surface.
Check that the mounting screws on the inner frame are tightened securely to the back box.
For successful installation, ensure your existing mounting back box is at least 16mm deep to accommodate the switch mechanism. Always isolate the electrical supply at the main consumer unit before attempting any installation work. Secure the base plate to the back box using the provided screws, then snap the bronze front cover firmly into place until it clicks. For maintenance, keep the switch in top condition by wiping it with a soft, dry microfiber cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the bronze finish over time.
