Shopping.co.uk

Qboard Liquid Wetroom Floor Former - Centre Drain - (W)900mm (L)900mm

Qboard Liquid Wetroom Floor Former - Centre Drain - (W)900mm (L)900mm

The Qboard Liquid Wet room floor former with a center drain is a specific size variant measuring 0...

Best current price£140.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £140.00

View price history by clicking the chart icon.

B&QB&Q - Liquid Wetroom Floor Former With Centre Drain (W)900mm (L)900mm
Free delivery in 1–3 days
£140.00
Visit shop

Product Information

Full details

This guide is for homeowners and contractors looking to install a durable and reliable wet room floor. The Qboard Liquid Wetroom Floor Former provides a stable, pre-formed base for tiling, ensuring efficient drainage and a seamless finish. Its primary benefit is simplifying the creation of a watertight and level wet room. A potential caveat is that it requires proper subfloor preparation and sealing for optimal performance.

All features

BrandQboard

Extended Product Information

FAQs

What is the primary purpose of the Qboard Liquid Wetroom Floor Former?

Its purpose is to provide a ready-made, stable, and waterproof base for tiling in a wet room installation, complete with an integrated drain.

What are the dimensions of this specific model?

This model measures 900mm in length and 900mm in width (0.9m x 0.9m).

Do I need to add extra waterproofing on top of the former?

Yes, while the former is waterproof, it is standard practice to apply a compatible liquid or sheet waterproofing membrane over the entire surface and particularly at the edges and around the drain before tiling to ensure a completely watertight system.

Can this floor former be cut to size?

The product is designed to be used at its specified dimensions. Modifications may compromise its structural integrity and waterproofing capabilities.

What type of drain is included?

This model features a centre drain, designed for efficient water evacuation from the middle of the wet room area.

How is the floor former secured to the subfloor?

It is typically secured using a strong, waterproof tile adhesive applied to the underside of the former and the subfloor. It must also be properly integrated with the surrounding floor screed if applicable.

Is this suitable for underfloor heating?

Generally, yes, provided the underfloor heating system is installed according to its manufacturer's guidelines and compatible with the adhesive and tiling process used with the floor former.

Troubleshooting

Floor former not level

Re-adhere the former using a levelling compound or ensure the subfloor is adequately prepared before installation.

Drainage is slow

Check the drain trap and connecting pipework for any blockages. Ensure the former itself is correctly sloped towards the drain.

Water leakage around the edges

Inspect and reapply waterproofing membranes and sealants to all joints and edges. Ensure all connections are properly sealed.

Tiling adhesion issues

Verify that the surface of the floor former was clean and dry before tiling and that the correct tile adhesive for wet room conditions was used.

Pros and Cons

Pros

  • Simplifies wet room construction by providing a pre-formed base.
  • Ensures efficient water drainage with its central drain placement.
  • Creates a stable and level surface, crucial for successful tiling.
  • Made from durable materials for long-lasting use.
  • Helps achieve a professional and aesthetically pleasing wet room finish.

Cons

  • Requires careful subfloor preparation for optimal adhesion and stability.
  • Installation may require specific waterproofing techniques around the drain and edges.
  • The fixed size of 900mm x 900mm may not suit all bathroom layouts.
  • Dependent on proper sealing of surrounding areas to guarantee water tightness.

Setup, Compatibility & Care

Setup:

  1. Ensure the subfloor is clean, dry, and structurally sound.
  2. Position the Qboard floor former in the desired location.
  3. Apply a suitable waterproof adhesive to the underside of the former and the subfloor.
  4. Securely press the former into place, ensuring it is level.
  5. Allow the adhesive to cure fully according to the manufacturer's instructions.
  6. Apply appropriate waterproofing membranes and sealants to the edges and around the drain assembly as per wet room best practices.

Compatibility:

  • Compatible with most tile adhesives and grouts suitable for wet room applications.
  • Designed to connect to standard bathroom drainage systems.
  • Requires appropriate waterproofing and sealing products to create a fully watertight system.

Care:

  • Clean regularly with a mild detergent and water.
  • Avoid abrasive cleaners or harsh chemicals that could damage the surface or seals.
  • Periodically check seals around the drain and edges for any signs of wear or damage.

Price History

DatePrice
Visit shop