Metabo Sliding Crosscut Mitre Saw - 216mm 1500W 240V

Replace the blade when it becomes dull or damaged. The frequency depends on the type of wood and frequency of use.

Use a brush or compressed air to remove sawdust. Wipe down the surfaces with a damp cloth.

Loosen the mitre lock and set the angle using the markings on the saw. Tighten the lock to secure the setting.

Use blades designed for wood cutting. The blade type depends on the material and desired cut finish.

This saw is designed for cutting wood. Cutting metal may damage the saw.

Calibrate the saw regularly, use sharp blades, and ensure the workpiece is held securely.

Replacement parts are available through authorized Metabo dealers and online retailers.

Please refer to the Metabo documentation for warranty information.

Check and adjust the blade alignment. Ensure the workpiece is held securely against the fence.

Check the power supply and ensure the saw is properly plugged in. Check the motor brushes and replace if worn.

Check the dust collection bag or port for blockages. Clean or replace the dust bag as needed.

Check the blade for damage or balance issues. Ensure the saw is placed on a stable surface.

Recalibrate the mitre and bevel angles using a square. Check for play in the angle adjustment mechanism.