Washing Machine Door Seal Gasket - Bosch - 667220
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Bosch Washing Machine Door Seal Gasket (part #667220) is for homeowners experiencing leaks or mold around their washing machine door. Its key benefit is restoring a watertight seal, preventing water damage and improving hygiene. A potential caveat is the need for careful installation to ensure a proper fit. This genuine part is equivalent to Beko part #2804860300 and is compatible with various Beko and Swan washing machine models, ensuring a reliable replacement for your appliance.
All features
| Model Part Number | 667220 |
|---|---|
| Brand | Bosch |
Extended Product Information
FAQs
What washing machine brands is this door seal compatible with?
This is a genuine Bosch part #667220. It is equivalent to Beko part #2804860300 and is specifically compatible with listed Beko and Swan washing machine models.
How do I know if I need to replace my washing machine door seal?
Signs include visible leaks around the door during operation, significant mold or mildew growth that cannot be cleaned, or tears and cracks in the existing seal.
Is it difficult to install this washing machine door seal?
Installation can vary in difficulty depending on the washing machine model. It often requires removing the front panel. If you are not comfortable with appliance repair, it is recommended to consult a professional or your appliance's service manual.
How often should I clean the washing machine door seal?
It is best to wipe the seal dry after each wash. A more thorough cleaning with a damp cloth and mild detergent should be done periodically, at least once a month, or more often if you notice residue or odors.
Will this seal stop my washing machine from smelling bad?
Yes, if the odor is caused by mold and mildew buildup on the old, degraded seal, replacing it with a new, clean seal will help eliminate the source of the smell.
Can I use a universal door seal instead?
While universal seals exist, a genuine or equivalent replacement part like this Bosch 667220 ensures the correct fit and function for your specific Beko or Swan model, minimizing the risk of leaks or improper operation.
Troubleshooting
New seal is leaking
Ensure the seal is fully seated in the groove around the drum and door frame. Check for any trapped debris. Verify that the retaining clips or wires are securely in place.
Difficulty fitting the new seal
Ensure you have the correct part number for your model. Warm the rubber seal slightly with a hairdryer (on a low setting) to make it more pliable. Double-check that no part of the old seal or debris is obstructing the groove.
Mold is still appearing after replacement
While the new seal is resistant, excessive moisture or residue can still lead to mold. Ensure you are wiping the seal dry after washes and cleaning it regularly. Check for detergent buildup in the drum or dispenser that may be contributing.
Pros and Cons
Pros
- Restores original watertight seal, preventing leaks.
- Helps maintain a hygienic washing environment by reducing mold buildup.
- Genuine part ensures proper fit and function.
- Durable material for long-lasting performance.
Cons
- Requires careful installation, which may involve some disassembly of the washing machine.
- Compatibility is limited to specific Beko and Swan models; always verify part number.
- May require specific tools for removal and installation.
Setup, Compatibility & Care
Compatibility:
This gasket is a genuine Bosch part #667220 and is equivalent to Beko part #2804860300. It is confirmed compatible with Beko models WMA510W, WMD25080DN, WMD25101T, WMA1510W, WMA1510S. It also fits Swan models W2010W, SGFT1000, WML15060JB, SGF385, WS104200, ES1042CA3, VWM4210600, VWM42106-00, and variations identified by internal codes 064, 075, 179, 350, 400, 606. Always double-check your washing machine's model number and the part number of your existing seal before purchasing.
Setup (Installation):
Installation typically involves accessing the seal from the front of the washing machine. This may require removing the outer door panel and potentially the front support of the drum. The old seal is usually held in place by a spring clip or wire. Carefully release the old seal, clean the area thoroughly, and then fit the new gasket, ensuring it is seated correctly in the groove around the drum and door frame. Finally, reattach any panels removed. Due to the technical nature, consulting your washing machine's service manual or a professional may be advisable if you are not experienced with appliance repair.
Care:
To prolong the life of the door seal and maintain hygiene, regularly wipe it dry after each wash cycle. Periodically clean the seal with a damp cloth and mild detergent to remove any lint, hair, or detergent residue. Ensure the washing machine door is left slightly ajar between uses to allow for ventilation and prevent moisture buildup.